Recycled concrete aggregates (RCA), derived from demolishing concrete buildings and pavements, have been treated with significant value as a recycled resource. Using RCA instead of virgin aggregates for pavement construction became a feasible approach to conserve construction trash resources since approximately 140 million tons per year were produced in the United States. This research conducted a life cycle cost analysis of stabilized clay subgrade soils in Kansas, USA, combining with RCA from pavements damaged by freeze-thaw cycles and the D-cracks process. Class C fly ash and type II Portland cement were stabilizers for subgrade mixture designs. The performance of the mixtures was evaluated through Standard Proctor, unconfined compression strength (UCS), and California Bearing Ratio (CBR) tests. The full-depth flexible pavements incorporating these stabilized subgrades were designed using the AASHTOWare Pavement ME Design (PME) software. Results indicated that a 1:1 mix of Class C fly ash and type II Portland cement was the most effective stabilizer, decreasing the required thickness of the hot-mix asphalt (HMA) layer. The life cycle cost analysis demonstrated that the RCA-stabilized subgrades are economically viable when the chemical stabilizers are used in equal proportions.

错误:搜索内容不能为空,请输入英文关键词
错误:关键词超出字数限制,请精简
高级检索

Life Cycle Cost Analysis of Recycled Concrete Aggregates to Modify Soft Subgrade

  • Xingdong Wu,
  • Massoumeh Tavakol,
  • Stacey Kulesza,
  • Mustaque Hossain,
  • Ryan Barrett

摘要

Recycled concrete aggregates (RCA), derived from demolishing concrete buildings and pavements, have been treated with significant value as a recycled resource. Using RCA instead of virgin aggregates for pavement construction became a feasible approach to conserve construction trash resources since approximately 140 million tons per year were produced in the United States. This research conducted a life cycle cost analysis of stabilized clay subgrade soils in Kansas, USA, combining with RCA from pavements damaged by freeze-thaw cycles and the D-cracks process. Class C fly ash and type II Portland cement were stabilizers for subgrade mixture designs. The performance of the mixtures was evaluated through Standard Proctor, unconfined compression strength (UCS), and California Bearing Ratio (CBR) tests. The full-depth flexible pavements incorporating these stabilized subgrades were designed using the AASHTOWare Pavement ME Design (PME) software. Results indicated that a 1:1 mix of Class C fly ash and type II Portland cement was the most effective stabilizer, decreasing the required thickness of the hot-mix asphalt (HMA) layer. The life cycle cost analysis demonstrated that the RCA-stabilized subgrades are economically viable when the chemical stabilizers are used in equal proportions.