Scholarlink

This study highlights application of ANOVA in order to analysis the effect of voltage, pulse-on (ton), pulse-off (toff), and wire speed impact output parameters like surface roughness, kerf width, and machine removal rate during the Wire Electrical Discharge Machining (WEDM of Inconel 825). Here, the experimentation has been carried out using Taguchi L9 orthogonal array. The study also utilizes the Grey relation analysis to obtain the optimal combinations as ton = 70 µs, toff = 7 µs, wire speed = 3 (level), and voltage = L (level).

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Experimental Study on Wire EDM of Inconel-825: Optimization for Enhanced Machining Performance Using Grey Relation

  • 会议论文

  • 发表日期：

    2025年

查看全文
  • Viraj Varia,
  • Yash Hansora,
  • Kumar Abhishek,
  • Soni Kumari

摘要

This study highlights application of ANOVA in order to analysis the effect of voltage, pulse-on (ton), pulse-off (toff), and wire speed impact output parameters like surface roughness, kerf width, and machine removal rate during the Wire Electrical Discharge Machining (WEDM of Inconel 825). Here, the experimentation has been carried out using Taguchi L9 orthogonal array. The study also utilizes the Grey relation analysis to obtain the optimal combinations as ton = 70 µs, toff = 7 µs, wire speed = 3 (level), and voltage = L (level).