Concrete Using Crushed Rubber as a Substitute for Fine Aggregate

Seeking to contribute to reduce the impact of improper disposal of tires on the environmentEnvironment, this article proposes the use of tire rubber as fine aggregate in the production of concreteConcrete. The specimens of dimensions 160 mm × 40 mm × 40 mm were made in the 3:2:1 trace and rubber was used to replace sand as fine aggregate, in the proportions of 5%, 10% and 15% by weight. Compression and flexion tests were performed at 7, 14 and 28 days of cure using a Kratos press, with a maximum cell of 10 tf (98.07 kN), and with a displacement speed of 5.0 mm/min. The results suggest that crushed rubber has restricted use as a substitute for fine aggregate concreteConcrete. At 7 days of curing the best result of mechanical compressive strengthCompressive strength was 19 N/mm2 and for flexural strengthFlexural strength was 5.9 N/mm2 both for 5% rubber replacing fine aggregate.