Analysis of Flexural Strength Tiles Made by ABS-X Material with Different Infill

This paper presents the results of bending tests of tiles made of ABS X material and analysis of mechanical characteristics. The tested tiles were made of ABS X material with a infill that has a Honeycomb sample structure, assuming that this type of infill has the highest values of modulus of elasticity and mechanical properties. The ABS X material performed very satisfactorily, with less cracking, excellent adhesion to the layer and improved mechanical properties. As the main advantage of a three-point bend test is its simplicity, the method used in testing tiles is precisely the three-point bend test. The orientation of the 3D printing while making the tiles was vertical, and the tile infills were made with a density of 50 and 100%. When analyzing the obtained results of the mechanical properties of the tiles, special attention was paid to the influence of the infill density on the mechanical properties. The results and analyzes obtained in this work can be used in practice and in further research, with the tendency to examine and compare as many materials as possible, with different structures and infill densities.