Scholarlink

Abstract <p>The lubricant properties of the working fluids at the interfaces of copper and tool alloys are investigated. An empirical formula describing the influence of the limiting wetting angle on the effectiveness of the working fluid is derived. If the proposed formula is used to select the working fluid in the machining of copper alloys by uncoated hard-alloy tools, laborious testing may be eliminated and no expensive equipment is required.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Selecting the Best Working Fluid in Machining Copper Alloys

  • 期刊论文

  • 发表日期：

    2025年6月1日

查看全文
  • A. G. Kisel’

摘要

Abstract

The lubricant properties of the working fluids at the interfaces of copper and tool alloys are investigated. An empirical formula describing the influence of the limiting wetting angle on the effectiveness of the working fluid is derived. If the proposed formula is used to select the working fluid in the machining of copper alloys by uncoated hard-alloy tools, laborious testing may be eliminated and no expensive equipment is required.