Scholarlink

Abstract <p>The deviation from the straightness of the steel cord is affected by the level and distribution of residual stresses. One of the effective ways to reduce residual stresses in the steel cord is the use of alternating metal cord bending. A scheme of alternating metal cord bending on a deforming roller is presented. The influence of the diameter of the deforming roller on the deviation from straightness of the complex design of the metal cord was assessed using the criterion of a comprehensive assessment. The results of the experiment obtained in the manufacture of steel cord using deforming rollers are presented. The diameters of the deforming rollers are determined, which make it possible to reduce the deviation from the straightness of the metal cord of a complex design.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Methods of Processing High-Carbon Wire and Metal Cord with Straightening Devices

  • 期刊论文

  • 发表日期：

    2025年8月1日

查看全文
  • Yu. L. Bobarykin,
  • Yu. V. Martyanov,
  • O. Yu. Khodosovskaya

摘要

Abstract

The deviation from the straightness of the steel cord is affected by the level and distribution of residual stresses. One of the effective ways to reduce residual stresses in the steel cord is the use of alternating metal cord bending. A scheme of alternating metal cord bending on a deforming roller is presented. The influence of the diameter of the deforming roller on the deviation from straightness of the complex design of the metal cord was assessed using the criterion of a comprehensive assessment. The results of the experiment obtained in the manufacture of steel cord using deforming rollers are presented. The diameters of the deforming rollers are determined, which make it possible to reduce the deviation from the straightness of the metal cord of a complex design.