Abstract <p>A device for controlling active and reactive power based on a three-phase current converter (current inverter) with an output <i>CL</i> filter (grid controller) is considered. The consideration is focused on comparing filter characteristics and the effect of filter parameters on the current generated by the controller. Two filter circuits have been analyzed, which differ in the method of connecting a damping resistor. A method is proposed for determining the parameters of the output filter elements, in which the resistor is connected in parallel with the choking coil. The results of calculating the filter parameters have been verified by simulation using SimInTech software package.</p>

错误:搜索内容不能为空,请输入英文关键词
错误:关键词超出字数限制,请精简
高级检索

Comparative Analysis and Selection of Parameters of the Basic Structures of CL Filters of a Current-Source Inverter Integrated in a Grid-Tie Controller Based on an Inductive Storage

  • M. G. Lepanov,
  • M. G. Kiselev,
  • E. P. Kurbatova,
  • V. A. Kochnev

摘要

Abstract

A device for controlling active and reactive power based on a three-phase current converter (current inverter) with an output CL filter (grid controller) is considered. The consideration is focused on comparing filter characteristics and the effect of filter parameters on the current generated by the controller. Two filter circuits have been analyzed, which differ in the method of connecting a damping resistor. A method is proposed for determining the parameters of the output filter elements, in which the resistor is connected in parallel with the choking coil. The results of calculating the filter parameters have been verified by simulation using SimInTech software package.