Scholarlink

Abstract <p>In screw rolling, the workpiece is deformed by rolls rotating in the same direction, while friction forces impart rotational and translational motion to the workpiece. For the piercing process to be stable, the gripping condition, which is determined by the balance of pulling forces, must be met. This article examines the conditions for balancing pulling forces during piercing of a workpiece in two-, three-, and four-high screw rolling piercing mills, demonstrating the obvious advantages of three- and four-high piercing schemes over two-high piercing.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Balance of Pulling Forces in Roll Piercing

  • 期刊论文

  • 发表日期：

    2025年9月1日

查看全文
  • B. A. Romantsev,
  • M. M. Skripalenko,
  • A. S. Budnikov,
  • V. S. Yusupov,
  • V. A. Andreev,
  • V. P. Kuznetsov

摘要

Abstract

In screw rolling, the workpiece is deformed by rolls rotating in the same direction, while friction forces impart rotational and translational motion to the workpiece. For the piercing process to be stable, the gripping condition, which is determined by the balance of pulling forces, must be met. This article examines the conditions for balancing pulling forces during piercing of a workpiece in two-, three-, and four-high screw rolling piercing mills, demonstrating the obvious advantages of three- and four-high piercing schemes over two-high piercing.