<p>The doping technique is widely used to stabilise C<sub>3</sub>S polymorphs, combined with synthesis temperature and cooling techniques. This work studied the doping technique using ZnO as a dopant at contents of 1.5, 2.0, 4.0, 8.0, and 10.0wt% and evaluated its effect on the polymorphism and reactivity of C<sub>3</sub>S. The characterisation of the phases in the anhydrous state was carried out by X-ray diffraction (XRD), and the effect of doping on chemical bonds and displacements in the crystalline structure was identified by Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy (RAMAN). Hydration was assessed using isothermal calorimetry and X-ray diffraction (XRD) techniques. The results show a delay in the hydration process in all the doped pastes, a reduction in the average crystallite size with increasing dopant content, and changes in the displacements and symmetry of the polymorphs.</p>

错误:搜索内容不能为空,请输入英文关键词
错误:关键词超出字数限制,请精简
高级检索

The use of ZnO for the stabilisation of C3S polymorphs

  • Luciana Queiroz,
  • Waleska Barbosa,
  • Ana Paula Kirchheim,
  • Carlos Bergmann

摘要

The doping technique is widely used to stabilise C3S polymorphs, combined with synthesis temperature and cooling techniques. This work studied the doping technique using ZnO as a dopant at contents of 1.5, 2.0, 4.0, 8.0, and 10.0wt% and evaluated its effect on the polymorphism and reactivity of C3S. The characterisation of the phases in the anhydrous state was carried out by X-ray diffraction (XRD), and the effect of doping on chemical bonds and displacements in the crystalline structure was identified by Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy (RAMAN). Hydration was assessed using isothermal calorimetry and X-ray diffraction (XRD) techniques. The results show a delay in the hydration process in all the doped pastes, a reduction in the average crystallite size with increasing dopant content, and changes in the displacements and symmetry of the polymorphs.