Scholarlink

Background <p>Hydrothermal liquefaction (HTL) is a promising thermochemical conversion process for lignocellulosic biomass, which is a sustainable feedstock for the production of renewable fuels. For agricultural residues, systematic multi-step solvent fractionation is still understudied, despite the fact that traditional single-solvent extraction after HTL produces mixed bio-oil fractions with heterogeneous properties. Tetrahydrofuran (THF), ethyl acetate (EAC), and n-hexane are used in this study’s sequential extraction methodology to separate HTL bio-oil from sugarcane bagasse according to polarity. The method overcomes the drawbacks of single-solvent systems for the selective recovery of organic compounds with low and mid-polarity. Sequential extraction produced differential yields of 74.6 ± 2.4% (THF), 44.6 ± 1.9% (EAC), and 17.5 ± 1.2% (n-hexane) under optimal conditions (280–340&#xa0;°C, 72–175&#xa0;bar, 20–60&#xa0;min), indicating a 25% increase in separation efficiency over traditional methods. The systematic characterization of polarity-based fractionation after HTL is novel because it allows for the targeted recovery of aliphatic hydrocarbons, ketones, and phenolic compounds for various uses.</p> Methods <p>The experiment was done with sugarcane bagasse. First the sugarcane bagasse was. Then ground into a powder. After that it went through a process called liquefaction. This was done in a Parr reactor. The temperatures used were between 280 and 340 degrees. The pressure was between 72 and 175&#xa0;bar. The process took between 20 and 60&#xa0;min. They used three solvents to get the bio-oils out of the sugarcane bagasse. These solvents were tetrahydrofuran, ethyl acetate and n-hexane. The sugarcane bagasse produced types of bio-oils, like heavy bio-oils, mid bio-oils and light bio-oils. The resultant oils were analyzed through techniques such as gas chromatography and mass spectrometry to assess their composition, energy production potential, and properties upon heating.</p> Results <p>The experiment was carried out using sugarcane bagasse. What was first was the sugarcane bagasse. Then ground into a powder. Subsequently it passed through a liquification process. This occurred in a Parr reactor. Ranging between 280 and 340 degrees were used. The pressure ranged between 72 and 175 bar. It was done 20 to 60 min. The sugarcane bagasse was extracting the bio-oils in three solvents. These were tetrahydrofuran, ethyl acetate and n-hexane. The sugarcane bagasse generated forms of bio-oils, such as heavy bio-oils, mid bio-oils and light bio-oils. The resulting oils were examined using methods like gas chromatography and mass spectrometry to determine their composition, potential of energy production and their properties when heated. Using three solvents—tetrahydrofuran (THF), ethyl acetate (EAC), and n hexane (n H) sequential extraction achieved yields of 74.6 ± 2.4%, 44.6 ± 1.9%, and 17.5 ± 1.2%, respectively. Experiments were performed in triplicate at 280–340 °C and 72–175 bar. The multi-step process improved separation efficiency by 25% over conventional methods. Limitations include solvent recovery losses (~ 8%) and scale up challenges. The results demonstrate a reproducible and sustainable route for valorizing sugarcane bagasse into liquid fuels. Upon examining the bio oils with a tool, we identified several significant chemical groups, including alkanes, ketones, and phenolic compounds. The dense portion of the oil contained many alkanes. The central section contained phenols and ketones, which is intriguing because it implies this oil might potentially serve as an alternative to certain petroleum-derived asphalt.</p> Conclusions <p>Multi-step hydrothermal liquefaction and solvent extraction of sugarcane bagasse was able to improve the quality and recovery of bio-oil. THF was the best solvent to use in the extraction and longer reaction time and increased temperature favored more yield and deoxygenation. Hydrothermal liquefaction is one of the feasible and viable thermal aptitude transformation methods that can be used to convert sugarcane bagasse into renewable biofuels and chemical intermediates. The end products of the bio-oils were found to be combustible with similar properties compared to the petroleum crude oil.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Enhanced multi step solvent extraction for fractionated bio oil production from sugarcane bagasse via hydrothermal liquefaction

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年3月8日

查看全文
  • E. Abdel Kader,
  • Randa M. Osman,
  • R. El-Araby,
  • S. I. Hawash

摘要

Background

Hydrothermal liquefaction (HTL) is a promising thermochemical conversion process for lignocellulosic biomass, which is a sustainable feedstock for the production of renewable fuels. For agricultural residues, systematic multi-step solvent fractionation is still understudied, despite the fact that traditional single-solvent extraction after HTL produces mixed bio-oil fractions with heterogeneous properties. Tetrahydrofuran (THF), ethyl acetate (EAC), and n-hexane are used in this study’s sequential extraction methodology to separate HTL bio-oil from sugarcane bagasse according to polarity. The method overcomes the drawbacks of single-solvent systems for the selective recovery of organic compounds with low and mid-polarity. Sequential extraction produced differential yields of 74.6 ± 2.4% (THF), 44.6 ± 1.9% (EAC), and 17.5 ± 1.2% (n-hexane) under optimal conditions (280–340 °C, 72–175 bar, 20–60 min), indicating a 25% increase in separation efficiency over traditional methods. The systematic characterization of polarity-based fractionation after HTL is novel because it allows for the targeted recovery of aliphatic hydrocarbons, ketones, and phenolic compounds for various uses.

Methods

The experiment was done with sugarcane bagasse. First the sugarcane bagasse was. Then ground into a powder. After that it went through a process called liquefaction. This was done in a Parr reactor. The temperatures used were between 280 and 340 degrees. The pressure was between 72 and 175 bar. The process took between 20 and 60 min. They used three solvents to get the bio-oils out of the sugarcane bagasse. These solvents were tetrahydrofuran, ethyl acetate and n-hexane. The sugarcane bagasse produced types of bio-oils, like heavy bio-oils, mid bio-oils and light bio-oils. The resultant oils were analyzed through techniques such as gas chromatography and mass spectrometry to assess their composition, energy production potential, and properties upon heating.

Results

The experiment was carried out using sugarcane bagasse. What was first was the sugarcane bagasse. Then ground into a powder. Subsequently it passed through a liquification process. This occurred in a Parr reactor. Ranging between 280 and 340 degrees were used. The pressure ranged between 72 and 175 bar. It was done 20 to 60 min. The sugarcane bagasse was extracting the bio-oils in three solvents. These were tetrahydrofuran, ethyl acetate and n-hexane. The sugarcane bagasse generated forms of bio-oils, such as heavy bio-oils, mid bio-oils and light bio-oils. The resulting oils were examined using methods like gas chromatography and mass spectrometry to determine their composition, potential of energy production and their properties when heated. Using three solvents—tetrahydrofuran (THF), ethyl acetate (EAC), and n hexane (n H) sequential extraction achieved yields of 74.6 ± 2.4%, 44.6 ± 1.9%, and 17.5 ± 1.2%, respectively. Experiments were performed in triplicate at 280–340 °C and 72–175 bar. The multi-step process improved separation efficiency by 25% over conventional methods. Limitations include solvent recovery losses (~ 8%) and scale up challenges. The results demonstrate a reproducible and sustainable route for valorizing sugarcane bagasse into liquid fuels. Upon examining the bio oils with a tool, we identified several significant chemical groups, including alkanes, ketones, and phenolic compounds. The dense portion of the oil contained many alkanes. The central section contained phenols and ketones, which is intriguing because it implies this oil might potentially serve as an alternative to certain petroleum-derived asphalt.

Conclusions

Multi-step hydrothermal liquefaction and solvent extraction of sugarcane bagasse was able to improve the quality and recovery of bio-oil. THF was the best solvent to use in the extraction and longer reaction time and increased temperature favored more yield and deoxygenation. Hydrothermal liquefaction is one of the feasible and viable thermal aptitude transformation methods that can be used to convert sugarcane bagasse into renewable biofuels and chemical intermediates. The end products of the bio-oils were found to be combustible with similar properties compared to the petroleum crude oil.