Scholarlink

Background <p>Diatoms are widely studied biological objects because of their large variety of geometric shapes and their unique physical and chemical properties. They survive widely in nature within moisture. Imaging the diatoms three dimensionally in moisture and correlating their mechanical behavior is an interesting and challenging topic.</p> Results <p>Here, the morphology and mechanical properties of diatoms were studied in wet state and then in dry state. A customized sample holder was integrated into a laboratory transmission X-ray microscope to image the morphology changes and volume shrinkage of the diatom while transitioning from the wet to the dry state. The measured volume shrinkage of a single diatom cell of <i>Actinocyclus</i> sp. is about 0.16. By performing an in-situ micromechanical experiment in both states, the maximal loading force of a single <i>Actinocyclus</i> sp. was determined until cracking appeared and compared in both states. This value is in the range of several hundred&#xa0;µN in the wet state and single-digit mN in the dry state. The normalized stiffness of the studied diatoms is significantly higher in the dry state than in the wet state. 2D radiograph and 3D tomography imaging of the diatoms reveal the different locations for crack propagation in both states.</p> Conclusions <p>Our study supplies the important imaging method, the structure and functional information of the diatoms for future studies on diatoms in moisture but also in dry state. This information can help design bio-inspired materials and even in the development of bio-sustainable materials.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Morphology and mechanical behavior of diatoms in wet and dry states studied using nano-XCT

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年8月5日

查看全文
  • Qiong Li,
  • Jürgen Gluch,
  • Zhongquan Liao,
  • André Clausner,
  • Przemysław Dąbek,
  • Ehrenfried Zschech

摘要

Background

Diatoms are widely studied biological objects because of their large variety of geometric shapes and their unique physical and chemical properties. They survive widely in nature within moisture. Imaging the diatoms three dimensionally in moisture and correlating their mechanical behavior is an interesting and challenging topic.

Results

Here, the morphology and mechanical properties of diatoms were studied in wet state and then in dry state. A customized sample holder was integrated into a laboratory transmission X-ray microscope to image the morphology changes and volume shrinkage of the diatom while transitioning from the wet to the dry state. The measured volume shrinkage of a single diatom cell of Actinocyclus sp. is about 0.16. By performing an in-situ micromechanical experiment in both states, the maximal loading force of a single Actinocyclus sp. was determined until cracking appeared and compared in both states. This value is in the range of several hundred µN in the wet state and single-digit mN in the dry state. The normalized stiffness of the studied diatoms is significantly higher in the dry state than in the wet state. 2D radiograph and 3D tomography imaging of the diatoms reveal the different locations for crack propagation in both states.

Conclusions

Our study supplies the important imaging method, the structure and functional information of the diatoms for future studies on diatoms in moisture but also in dry state. This information can help design bio-inspired materials and even in the development of bio-sustainable materials.