Scholarlink

Background <p>This study evaluated the color stability of digitally fabricated complete dentures compared to conventional ones.</p> Materials and methods <p>Forty-five specimens were fabricated using 3 different manufacturing methods (injection mold, one-piece milling, and two-piece 3D printing and milling techniques), with 15 specimens per group. After implementing a standardized polishing protocol, each group was randomly subdivided into three subgroups (<i>n</i> = 5) and immersed in distilled water, coffee, and red wine for seven days at a controlled temperature of 37&#xa0;°C. Color changes in denture teeth and base materials were evaluated utilizing VITA Easyshade and ImageJ software before and after immersion. Subsequently, all specimens underwent a manufacturer-recommended denture cleansing regimen for seven days, followed by a repeated staining cycle. Two-way ANOVA and Tukey post-hoc tests were used for statistical analysis (α = 0.05), while the prevalence of denture tooth shade change was reported descriptively.</p> Results <p>The finding revealed that coffee caused more discoloration than red wine. Milled specimens showed better color stability against red wine than conventionally fabricated dentures. While initial staining was noted, the cleaning protocol successfully restored the original colors. This pattern persisted with repeated staining, highlighting the importance of material selection and maintenance in maintaining denture aesthetics.</p> Conclusions <p>Exposure to coffee and red wine leads to noticeable color changes in both denture teeth and base materials. The degree of staining depends on the specific material composition, highlighting the importance of selecting stain-resistant materials for better long-term color stability.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Impact of digital fabrication techniques on the color stability of complete dentures base and artificial teeth

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年12月22日

查看全文
  • Ali Sameer Alsharif,
  • Ramtin Sadid-Zadeh,
  • Rui Li,
  • Wendy Auclair Clark,
  • Ahmed Yaseen Alqutaibi

摘要

Background

This study evaluated the color stability of digitally fabricated complete dentures compared to conventional ones.

Materials and methods

Forty-five specimens were fabricated using 3 different manufacturing methods (injection mold, one-piece milling, and two-piece 3D printing and milling techniques), with 15 specimens per group. After implementing a standardized polishing protocol, each group was randomly subdivided into three subgroups (n = 5) and immersed in distilled water, coffee, and red wine for seven days at a controlled temperature of 37 °C. Color changes in denture teeth and base materials were evaluated utilizing VITA Easyshade and ImageJ software before and after immersion. Subsequently, all specimens underwent a manufacturer-recommended denture cleansing regimen for seven days, followed by a repeated staining cycle. Two-way ANOVA and Tukey post-hoc tests were used for statistical analysis (α = 0.05), while the prevalence of denture tooth shade change was reported descriptively.

Results

The finding revealed that coffee caused more discoloration than red wine. Milled specimens showed better color stability against red wine than conventionally fabricated dentures. While initial staining was noted, the cleaning protocol successfully restored the original colors. This pattern persisted with repeated staining, highlighting the importance of material selection and maintenance in maintaining denture aesthetics.

Conclusions

Exposure to coffee and red wine leads to noticeable color changes in both denture teeth and base materials. The degree of staining depends on the specific material composition, highlighting the importance of selecting stain-resistant materials for better long-term color stability.