Scholarlink

Objective <p>The purpose of this study was to evaluate the feasibility and the trajectories of dual sacral-2 alar-iliac (S2AI) screw fixation with three-dimensional digital technology simulation analysis.</p> Methods <p>The pelvic computed tomography scan data of 60 (30 men and 30 women, age: 25–86 years) individuals were selected and reconstructed. The trajectories of dual S2AI screws were plotted using three-dimensional reconstruction software. A cylinder with a radius of 5&#xa0;mm was selected to simulate screw placement. If screw placement based on the cylinder with 5&#xa0;mm radius failed, selected a cylinder with a radius of 4.5&#xa0;mm or 4&#xa0;mm. Dual S2AI trajectories were simulated, the maximum length and width of the trajectories were ensured, and their parameters were precisely measured. All parameters were measured in the three-dimensional image, including distance parameters, radius and angles.</p> Results <p>The placement of dual S2AI screws on the same side could be achieved in all individuals. No significant differences were found between the male and female regarding the head inclination angle, abduction angle, and total length or thread length of screws in the same position (<i>P</i> &gt; 0.05). LH (the shortest distance from the greater sciatic notch to the cross-section of the screw trajectory) were17.52 ± 3.96&#xa0;mm and 14.18 ± 2.92&#xa0;mm in L1, 28.19 ± 2.58&#xa0;mm and 25.54 ± 4.15&#xa0;mm in L2, 16.09 ± 4.08&#xa0;mm and 14.71 ± 3.94&#xa0;mm in R1, 26.90 ± 3.76&#xa0;mm and 24.59 ± 2.85&#xa0;mm in R2 in male and female models, respectively. The shortest distance from the greater sciatic notch to the cross-section of the screw trajectory differed significantly between the sexes (<i>P</i> &lt; 0.05).</p> Conclusion <p>Using a radius of 4&#xa0;mm (minimum diameter of S2AI screw) as a standard, it is feasible to place two S2AI screws on the same side for the Chinese adult. Screw placement can be achieved by trisecting the lateral process of S1-S2, with one screw inserted in the bottom third and the other in the upper third. Furthermore, preoperative three-dimensional digital technology simulation analysis can effectively simulate the dual S2AI screws trajectories on the same side, and they can provide accurate data for clinical applications.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Radiographic parameters and feasibility analysis of dual sacral-2 alar-iliac screw fixation using three-dimensional digital technology

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年9月2日

查看全文
  • Mengqi Xie,
  • Chao Chen,
  • Xun Sun,
  • Xiaoman Dong,
  • Zhi Wang,
  • Dong Zhao,
  • Gang Liu,
  • Shan Zhu,
  • Baoshan Xu,
  • Yu Zhao,
  • Xinlong Ma,
  • Qiang Yang

摘要

Objective

The purpose of this study was to evaluate the feasibility and the trajectories of dual sacral-2 alar-iliac (S2AI) screw fixation with three-dimensional digital technology simulation analysis.

Methods

The pelvic computed tomography scan data of 60 (30 men and 30 women, age: 25–86 years) individuals were selected and reconstructed. The trajectories of dual S2AI screws were plotted using three-dimensional reconstruction software. A cylinder with a radius of 5 mm was selected to simulate screw placement. If screw placement based on the cylinder with 5 mm radius failed, selected a cylinder with a radius of 4.5 mm or 4 mm. Dual S2AI trajectories were simulated, the maximum length and width of the trajectories were ensured, and their parameters were precisely measured. All parameters were measured in the three-dimensional image, including distance parameters, radius and angles.

Results

The placement of dual S2AI screws on the same side could be achieved in all individuals. No significant differences were found between the male and female regarding the head inclination angle, abduction angle, and total length or thread length of screws in the same position (P > 0.05). LH (the shortest distance from the greater sciatic notch to the cross-section of the screw trajectory) were17.52 ± 3.96 mm and 14.18 ± 2.92 mm in L1, 28.19 ± 2.58 mm and 25.54 ± 4.15 mm in L2, 16.09 ± 4.08 mm and 14.71 ± 3.94 mm in R1, 26.90 ± 3.76 mm and 24.59 ± 2.85 mm in R2 in male and female models, respectively. The shortest distance from the greater sciatic notch to the cross-section of the screw trajectory differed significantly between the sexes (P < 0.05).

Conclusion

Using a radius of 4 mm (minimum diameter of S2AI screw) as a standard, it is feasible to place two S2AI screws on the same side for the Chinese adult. Screw placement can be achieved by trisecting the lateral process of S1-S2, with one screw inserted in the bottom third and the other in the upper third. Furthermore, preoperative three-dimensional digital technology simulation analysis can effectively simulate the dual S2AI screws trajectories on the same side, and they can provide accurate data for clinical applications.