Scholarlink

Abstract <p>Tribological tests of a composite material based on the antifriction alloy AOM20-1 were carried out. The samples were produced using reaction casting, mixing titanium particles to form a structure with intermetallic strengthening. Dry sliding friction tests were carried out at sliding speeds from 0.25 to 0.75 m/s and loads from 0.5 to 3.0 MPa. A comprehensive comparison of the tribological properties of samples and friction processes (wear intensity, friction coefficient, stability index) was used. The loading conditions under which the material demonstrates the best set of characteristics have been determined: sliding speed of 0.5 m/s under a load of 1.5 MPa.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Determination of Triboloading Conditions of Composite Material Based on AO20-1 Alloy

  • 期刊论文

  • 发表日期：

    2025年12月8日

查看全文
  • P. A. Bykov,
  • I. E. Kalashnikov,
  • L. I. Kobelva,
  • I. V. Katin,
  • R. S. Mikheev

摘要

Abstract

Tribological tests of a composite material based on the antifriction alloy AOM20-1 were carried out. The samples were produced using reaction casting, mixing titanium particles to form a structure with intermetallic strengthening. Dry sliding friction tests were carried out at sliding speeds from 0.25 to 0.75 m/s and loads from 0.5 to 3.0 MPa. A comprehensive comparison of the tribological properties of samples and friction processes (wear intensity, friction coefficient, stability index) was used. The loading conditions under which the material demonstrates the best set of characteristics have been determined: sliding speed of 0.5 m/s under a load of 1.5 MPa.