Scholarlink

Abstract <p>Experimental studies were conducted on the high-temperature forming of materials based on TiB/TiAl(Nb, Mo)B under process conditions that combine combustion in the mode of self-propagating high-temperature synthesis (SHS) of the initial powder components and their shear deformation following the passage of the combustion wave—free SHS compression. The objects of study were composites consisting of 100% TiB–(20–40) wt % Ti (TiB layer) and TiAl(Nb, Mo)B alloy (at %: 51.85 Ti–43 Al–4 Nb–1 Mo–0.15 B), as well as two-layer composite materials with the following layer proportions, vol %: 70TiB/30TiAl(Nb, Mo)B, 50TiB/50TiAl(Nb, Mo)B, 30TiB/70TiAl(Nb, Mo)B. The degree of deformation was chosen as the criterion for formability of the composites during shear deformation. It was established that, by varying the composition of each layer in the composite and the technological parameters of free SHS compression, it is possible to regulate the degree of deformation from 0.2 to 0.55. It was shown that the technological parameters of free SHS compression (holding time, pressing pressure, deformation rate) and the initial composition affect the formability and structure of the composites. The structural features and phase composition of the composites obtained were studied. It was demonstrated that a diffusion zone forms between the ceramic and intermetallic layers as a result of chemical interaction, the size of which can be regulated within the range of 30–150 μm.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

High-Temperature Molding, Structure, and Phase Composition of Composites Based on TiB/TiAl(Nb, Mo)B

  • 期刊论文

  • 发表日期：

    2025年9月24日

查看全文
  • P. M. Bazhin,
  • M. S. Antipov,
  • A. P. Chizhikov,
  • A. S. Konstantinov,
  • A. D. Bazhina,
  • P. A. Stolin

摘要

Abstract

Experimental studies were conducted on the high-temperature forming of materials based on TiB/TiAl(Nb, Mo)B under process conditions that combine combustion in the mode of self-propagating high-temperature synthesis (SHS) of the initial powder components and their shear deformation following the passage of the combustion wave—free SHS compression. The objects of study were composites consisting of 100% TiB–(20–40) wt % Ti (TiB layer) and TiAl(Nb, Mo)B alloy (at %: 51.85 Ti–43 Al–4 Nb–1 Mo–0.15 B), as well as two-layer composite materials with the following layer proportions, vol %: 70TiB/30TiAl(Nb, Mo)B, 50TiB/50TiAl(Nb, Mo)B, 30TiB/70TiAl(Nb, Mo)B. The degree of deformation was chosen as the criterion for formability of the composites during shear deformation. It was established that, by varying the composition of each layer in the composite and the technological parameters of free SHS compression, it is possible to regulate the degree of deformation from 0.2 to 0.55. It was shown that the technological parameters of free SHS compression (holding time, pressing pressure, deformation rate) and the initial composition affect the formability and structure of the composites. The structural features and phase composition of the composites obtained were studied. It was demonstrated that a diffusion zone forms between the ceramic and intermetallic layers as a result of chemical interaction, the size of which can be regulated within the range of 30–150 μm.