Horizontal and Vertical Profiling of the Proton Beam of Cyclotron C18/18 by Vibrating Wire Monitors of Modernized Diagnostic Station

期刊论文
发表日期：

2024年12月1日

查看全文

S. G. Arutunian,
A. P. Aprahamian,
A. V. Margaryan,
L. M. Lazarev,
N. M. Manukyan,
G. V. Mirzoyan,
E. G. Lazareva,
R. S. Gevorgyan,
A. A. Manukyan,
M. Chung

摘要

Abstract

The horizontal and vertical profiles of the proton beam of the cyclotron C18/18 were measured by a modernized diagnostic station based on vibrating wire monitors. Considering the results of the first experiments using monitors with an aperture of 14 mm and superimposed lead screens, monitors with an extended aperture (28 mm) and magnets removed from the beam exposure zone were developed. In addition, the sensors are assembled on a thick metal base that serves as a collimator for the beam. The problems of electromagnetic interference are solved by the fact that the electronic nodes of the station are assembled on the same base. Scanning in the new station is carried out in the same plane, as close as possible to the output flange of the cyclotron (54 mm). New software has been developed that normalizes the profiles by the maximum value. Test measurements of the proton beam profile in the range of the average beam current ~1 μA were carried out.