Scholarlink

Abstract <p>Electrical power supply transmission and distribution system is connected with high collection of ageing equipment. It might cause some lower reliability unsettled drop in power systems. The problem is related to the maintenance with higher efficiency in transmission and distribution system. A multistate Generation Provider (MGP) is proposed in the reliability evaluation. Reliability Network Equivalent Techniques (RNET) is performed to determine all the parameters to check the reliability. The load flow analysis is first performed to determine deliverable capacity in each and every transmission line. To reduce the burden of failure systems the Accelerated Contingency Analysis (ACA) is performed. The Monte Carlo Simulation (MCS) is performed to determine the reliability indices of load point. Thus, the bus voltage shows a deviation of about 0.576% to the existing methods. Reliability analysis and load flow analysis is implemented by Etap software.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Reliability Analysis of Power System Using a Multinomail Monte Carlo Simulation

  • 期刊论文

  • 发表日期：

    2025年8月1日

查看全文
  • R Ithaya,
  • N Kanthavelkumaran,
  • N. Visalatchi,
  • A Saravanan

摘要

Abstract

Electrical power supply transmission and distribution system is connected with high collection of ageing equipment. It might cause some lower reliability unsettled drop in power systems. The problem is related to the maintenance with higher efficiency in transmission and distribution system. A multistate Generation Provider (MGP) is proposed in the reliability evaluation. Reliability Network Equivalent Techniques (RNET) is performed to determine all the parameters to check the reliability. The load flow analysis is first performed to determine deliverable capacity in each and every transmission line. To reduce the burden of failure systems the Accelerated Contingency Analysis (ACA) is performed. The Monte Carlo Simulation (MCS) is performed to determine the reliability indices of load point. Thus, the bus voltage shows a deviation of about 0.576% to the existing methods. Reliability analysis and load flow analysis is implemented by Etap software.