Scholarlink

Abstract <p>The work is aimed at creating new scientifically proven technical and technological solutions for the development and implementation of additive manufacturing of products from heat-resistant reinforced composites allowing samples to be created of new equipment and structural products for the aerospace industry surpassing existing analogues in their properties. Samples of the binder used to obtain composites were studied. Studies were carried out using IR spectroscopy with Fourier transform, and a comparison of the bands of stretching and deformation vibrations of the studied sample and classical polydimethylsiloxane was carried out. The dry residue after combustion of the sample was studied using transmission electron microscopy. It was shown that the sample is polydimethylsiloxane filled with silicon dioxide. Chromatograms and molecular-weight characteristics of polydimethylsiloxane were obtained. The soluble part of the sample was no more than 35% in the case of using benzene and tetrahydrofuran as solvents.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Physical and Chemical Characteristics of a Thermoresistive Armored Composite for Additive Manufacturing

  • 期刊论文

  • 发表日期：

    2025年2月1日

查看全文
  • S. A. Sitnikov,
  • O. A. Butusova,
  • N. A. Bulychev

摘要

Abstract

The work is aimed at creating new scientifically proven technical and technological solutions for the development and implementation of additive manufacturing of products from heat-resistant reinforced composites allowing samples to be created of new equipment and structural products for the aerospace industry surpassing existing analogues in their properties. Samples of the binder used to obtain composites were studied. Studies were carried out using IR spectroscopy with Fourier transform, and a comparison of the bands of stretching and deformation vibrations of the studied sample and classical polydimethylsiloxane was carried out. The dry residue after combustion of the sample was studied using transmission electron microscopy. It was shown that the sample is polydimethylsiloxane filled with silicon dioxide. Chromatograms and molecular-weight characteristics of polydimethylsiloxane were obtained. The soluble part of the sample was no more than 35% in the case of using benzene and tetrahydrofuran as solvents.