Development and Experience of Manufacturing Track Detectors Made of Drift Tubes at the National Research Center “Kurchatov Institute”—Institute of High Energy Physics (IHEP)

期刊论文
发表日期：

2025年4月1日

查看全文

A. A. Borisov,
A. N. Isaev,
A. S. Kozhin,
M. M. Soldatov,
R. M. Fakhrutdinov,
A. P. Filin

摘要

Abstract

Design, assembly procedure, and some test results of track chambers based on drift tubes (DT) in a housing made of aluminum tubes with a diameter of 30 and 52 mm and mylar tubes with a diameter of 15 and 30 mm are presented.

Abstract <p>Design, assembly procedure, and some test results of track chambers based on drift tubes (DT) in a housing made of aluminum tubes with a diameter of 30 and 52 mm and mylar tubes with a diameter of 15&#xa0;and 30 mm are presented.</p>

Development and Experience of Manufacturing Track Detectors Made of Drift Tubes at the National Research Center “Kurchatov Institute”—Institute of High Energy Physics (IHEP)

摘要

Abstract <p>Design, assembly procedure, and some test results of track chambers based on drift tubes (DT) in a housing made of aluminum tubes with a diameter of 30 and 52 mm and mylar tubes with a diameter of 15 and 30 mm are presented.</p>