Scholarlink

Abstract <p>Extended defects in large synthetic diamonds grown at high pressures and high temperatures (HPHT) using the thermal gradient method were studied by X-ray topo-tomography with a laboratory setup. It is shown that the temperature and growth rate are the principal factors influencing the crystalline quality of the diamonds. Synthesis at high temperatures and low rates allows growth of single crystals with a low density of dislocations, stacking faults, and microtwin lamellae. The annihilation kinetics of the extended defects during annealing at high pressure implies important role of vacancy diffusion. The annihilation of such defects leads to formation of perfect dislocations.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

X-ray Topo-Tomography of Large HPHT Synthetic Diamonds

  • 期刊论文

  • 发表日期：

    2025年8月1日

查看全文
  • D. A. Zolotov,
  • A. V. Buzmakov,
  • A. F. Khokhryakov,
  • Yu. M. Borzdov,
  • L. D. Yagudin,
  • Yu. N. Palyanov,
  • I. G. Dyachkova,
  • V. E. Asadchikov,
  • A. A. Shiryaev

摘要

Abstract

Extended defects in large synthetic diamonds grown at high pressures and high temperatures (HPHT) using the thermal gradient method were studied by X-ray topo-tomography with a laboratory setup. It is shown that the temperature and growth rate are the principal factors influencing the crystalline quality of the diamonds. Synthesis at high temperatures and low rates allows growth of single crystals with a low density of dislocations, stacking faults, and microtwin lamellae. The annihilation kinetics of the extended defects during annealing at high pressure implies important role of vacancy diffusion. The annihilation of such defects leads to formation of perfect dislocations.