Scholarlink

Abstract <p>The paper presents results of local magnetic measurements at various regions of two 09G2S steel specimens plastically deformed by uniaxial tension. The first specimen was deformed to crack formation, while the second was deformed to the initiation of necking (before the initiation of strain localization). Magnetic characteristics were determined in both the major magnetization reversal cycle and the minor magnetization reversal cycles in medium and weak fields. The fundamental possibility of applicability of locally measured magnetic properties of plastically deformed steel products in the minor magnetization reversal cycles in medium and weak fields to the detection of potential nuclei is experimentally demonstrated. It is shown that the presence of peaks, their magnitudes, and the magnetic field strengths at which they form on the field dependence of differential magnetic permeability can be used to obtain information about the strain corresponding to the test object region.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Applicability of Magnetic Measurements to the Detection of Fracture Nucleation in 09G2S Steel

  • 期刊论文

  • 发表日期：

    2025年12月1日

查看全文
  • Yu. V. Khudorozhkova,
  • A. M. Povolotskaya,
  • S. V. Burov,
  • D. I. Vichuzhanin

摘要

Abstract

The paper presents results of local magnetic measurements at various regions of two 09G2S steel specimens plastically deformed by uniaxial tension. The first specimen was deformed to crack formation, while the second was deformed to the initiation of necking (before the initiation of strain localization). Magnetic characteristics were determined in both the major magnetization reversal cycle and the minor magnetization reversal cycles in medium and weak fields. The fundamental possibility of applicability of locally measured magnetic properties of plastically deformed steel products in the minor magnetization reversal cycles in medium and weak fields to the detection of potential nuclei is experimentally demonstrated. It is shown that the presence of peaks, their magnitudes, and the magnetic field strengths at which they form on the field dependence of differential magnetic permeability can be used to obtain information about the strain corresponding to the test object region.