Scholarlink

Abstract <p>The transition from a surface forest fire to a crown fire was experimentally studied under laboratory conditions. Using noncontact infrared (IR) diagnostic methods within narrow spectral ranges of infrared wavelengths, the propagation speed of the fire front was determined, along with temperature changes at control points where the combustion transitions from a surface fire to a crown fire. The experiment was conducted under varying incoming airflow velocities and different canopy heights relative to the surface fire. In the infrared range, the radiation from the sample surfaces was recorded using a JADE J530SB thermal imaging camera equipped with an optical filter (2.5–2.7 μm), enabling temperature measurements within the range of 310–1500 K. To interpret the recorded radiation from the test samples, calibration data provided by the manufacturer of the narrowband optical filter was used.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Infrared Thermography of The Process of Surface Forest Fire Spread and Transition to Crown Fire

  • 期刊论文

  • 发表日期：

    2025年10月1日

查看全文
  • D. P. Kasymov,
  • M. V. Agafontsev,
  • V. A. Perminov,
  • T. A. Belkova

摘要

Abstract

The transition from a surface forest fire to a crown fire was experimentally studied under laboratory conditions. Using noncontact infrared (IR) diagnostic methods within narrow spectral ranges of infrared wavelengths, the propagation speed of the fire front was determined, along with temperature changes at control points where the combustion transitions from a surface fire to a crown fire. The experiment was conducted under varying incoming airflow velocities and different canopy heights relative to the surface fire. In the infrared range, the radiation from the sample surfaces was recorded using a JADE J530SB thermal imaging camera equipped with an optical filter (2.5–2.7 μm), enabling temperature measurements within the range of 310–1500 K. To interpret the recorded radiation from the test samples, calibration data provided by the manufacturer of the narrowband optical filter was used.