Scholarlink

Abstract <p>Reference test blocks with 5 to 20 artificial defects each have been developed. The geometric characteristics of all defects are fully certified within the following ranges: opening width 0.5–5 μm, depth 40–640 μm, and length 1–17 μm. The blocks allow for microscope measurements of both the opening width and length of surface defects, as well as their depth, while simultaneously ensuring that defect cavities do not extend onto the block’s side surfaces. Comparative evaluations of the sensitivity classes of penetrants manufactured by Helling U 88, Rot 3000, Magnaflux Bycotest FP42, and Russian-made PF-01, Klever and PS-42 have been performed. A series of comparative photos of penetrant testing results and experimental data on the dependence of defect indications areas on their geometric characteristics are presented.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Reference Test Blocks for Determining the Sensitivity Levels of Penetrant Product Families

  • 期刊论文

  • 发表日期：

    2026年1月1日

查看全文
  • N. V. Delenkovsky,
  • A. B. Gnusin

摘要

Abstract

Reference test blocks with 5 to 20 artificial defects each have been developed. The geometric characteristics of all defects are fully certified within the following ranges: opening width 0.5–5 μm, depth 40–640 μm, and length 1–17 μm. The blocks allow for microscope measurements of both the opening width and length of surface defects, as well as their depth, while simultaneously ensuring that defect cavities do not extend onto the block’s side surfaces. Comparative evaluations of the sensitivity classes of penetrants manufactured by Helling U 88, Rot 3000, Magnaflux Bycotest FP42, and Russian-made PF-01, Klever and PS-42 have been performed. A series of comparative photos of penetrant testing results and experimental data on the dependence of defect indications areas on their geometric characteristics are presented.