Scholarlink

<p>The results of a numerical study of laminar liquid flow and heat transfer in an annular gap between two cylinders with a rib on one of the walls are presented. A mechanism for intensifying heat transfer between two cylinders, when one is rotating, was studied. Intensification was achieved by installing a single rib on the inner or outer cylinder. The rib was oriented along the annular system radius and occupied half the height of the gap between cylinders. The problem was formulated in two dimensions. The Reynolds number was varied in the range from 100 to 1000. Air was the working medium. Four options for the location of the intensifying rib were considered. A fundamental difference in the structure of the recirculation zone was noted for different rib locations. Maximum heat transfer was achieved on the wall of the stationary cylinder opposite the rib mounted on the rotating cylinder. Its multiple increase was observed compared to the case of rotating smooth cylinders.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Separated flow and heat transfer behind a single rib in an annular gap between rotating cylinders

  • 期刊论文

  • 发表日期：

    2025年11月1日

查看全文
  • T. V. Bogatko,
  • V. V. Terekhov,
  • V. I. Terekhov

摘要

The results of a numerical study of laminar liquid flow and heat transfer in an annular gap between two cylinders with a rib on one of the walls are presented. A mechanism for intensifying heat transfer between two cylinders, when one is rotating, was studied. Intensification was achieved by installing a single rib on the inner or outer cylinder. The rib was oriented along the annular system radius and occupied half the height of the gap between cylinders. The problem was formulated in two dimensions. The Reynolds number was varied in the range from 100 to 1000. Air was the working medium. Four options for the location of the intensifying rib were considered. A fundamental difference in the structure of the recirculation zone was noted for different rib locations. Maximum heat transfer was achieved on the wall of the stationary cylinder opposite the rib mounted on the rotating cylinder. Its multiple increase was observed compared to the case of rotating smooth cylinders.