Scholarlink

Abstract <p>TiC/Ti cermet coatings were produced on VT3-1 titanium alloy by electrical discharge treatment in a mixture of titanium granules with the addition of 2, 6, and 10 vol % titanium carbide powder. The titanium carbide concentration in the coating increased with increasing TiC powder content in the anode mixture. At the same time, the coating microhardness increased from 6.82 to 8.69 GPa, and the friction coefficient decreased from 0.65 to 0.42. The use of TiC/Ti coatings makes it possible to increase the wear resistance of the VT3-1 titanium alloy surface by up to 17 times.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Deposition of a TiC/Ti Cermet Coating on VT3-1 Titanium Alloy

  • 期刊论文

  • 发表日期：

    2025年5月1日

查看全文
  • A. A. Burkov

摘要

Abstract

TiC/Ti cermet coatings were produced on VT3-1 titanium alloy by electrical discharge treatment in a mixture of titanium granules with the addition of 2, 6, and 10 vol % titanium carbide powder. The titanium carbide concentration in the coating increased with increasing TiC powder content in the anode mixture. At the same time, the coating microhardness increased from 6.82 to 8.69 GPa, and the friction coefficient decreased from 0.65 to 0.42. The use of TiC/Ti coatings makes it possible to increase the wear resistance of the VT3-1 titanium alloy surface by up to 17 times.