Scholarlink

Abstract <p>The effect of a combined chemical heat treatment process with the saturation of small-size drills made of high-speed steels R6M5 and R6M5K5 with tungsten and nitrogen on the structure of the surface layer and the tool life was studied. Spectral analysis showed that the simultaneous saturation of iron-based drill alloys with tungsten and nitrogen in a pulsed mode produces diffusion layers of different thicknesses containing dispersed inclusions identified as tungsten nitrides. The treatment increases the surface layer hardness. The microhardness at the surface can increase up to 15 GPa, depending on the volume fractions of strengthening nitrides. Surface hardening leads to a substantial increase in the drill life when machining holes in various structural materials.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Surface Hardening of Small-Size High-Speed Steel Drills by Chemical Heat Treatment with the Formation of Tungsten Nitrides

  • 期刊论文

  • 发表日期：

    2025年5月1日

查看全文
  • L. G. Petrova,
  • V. M. Vdovin,
  • A. S. Sergeeva,
  • A. Yu. Malakhov

摘要

Abstract

The effect of a combined chemical heat treatment process with the saturation of small-size drills made of high-speed steels R6M5 and R6M5K5 with tungsten and nitrogen on the structure of the surface layer and the tool life was studied. Spectral analysis showed that the simultaneous saturation of iron-based drill alloys with tungsten and nitrogen in a pulsed mode produces diffusion layers of different thicknesses containing dispersed inclusions identified as tungsten nitrides. The treatment increases the surface layer hardness. The microhardness at the surface can increase up to 15 GPa, depending on the volume fractions of strengthening nitrides. Surface hardening leads to a substantial increase in the drill life when machining holes in various structural materials.