Abstract <p>The paper presents the results of polarization of PVDF films in glow, dielectric-barrier, and corona discharges. Measurements of the piezoelectric coefficient <i>d</i><sub>33</sub> showed that corona discharge had the highest polarization efficiency under the given processing conditions. A study of the samples by X-ray phase analysis and ATR IR spectrometry has shown that after polarization, the proportion of the piezoactive β-phase in the polymer increases, with its highest content being observed after corona treatment. It is noted that discharge treatment leads to a change in the wettability of the sample surface.</p>

错误:搜索内容不能为空,请输入英文关键词
错误:关键词超出字数限制,请精简
高级检索

Influence of Discharge Treatment on Piezoelectric and Surface Properties of Polyvinylidene Fluoride Films

  • S. A. Smirnov,
  • T. G. Shikova,
  • I. V. Kholodkov,
  • B. L. Gorberg,
  • M. O. Makeev,
  • P. A. Mikhalev,
  • A. S. Osipkov

摘要

Abstract

The paper presents the results of polarization of PVDF films in glow, dielectric-barrier, and corona discharges. Measurements of the piezoelectric coefficient d33 showed that corona discharge had the highest polarization efficiency under the given processing conditions. A study of the samples by X-ray phase analysis and ATR IR spectrometry has shown that after polarization, the proportion of the piezoactive β-phase in the polymer increases, with its highest content being observed after corona treatment. It is noted that discharge treatment leads to a change in the wettability of the sample surface.