Improved interfacial stability of all-solid-state batteries using cation-anion co-doped glass electrolytes

The electrochemical performance of all-solid-state batteries needs to be improved by addressing the poor stability against the lithium metal anode and the high interfacial resistance at the cathode–solid electrolyte interface. Here, metal halide-doped Li₇P₂S₈I–type (LPSI) solid electrolytes are synthesized that improve the electrochemical performance of all-solid-state batteries. The solid electrolytes exhibit a higher ionic conductivity value of 7.77 mS cm⁻¹ than bare LPSI solid electrolytes of 3.96 mS cm⁻¹, at room temperature. The metal halide-doped LPSI solid electrolyte is also stable against the lithium metal anode, with a calculated critical current density value of 1 mA cm⁻². The fabricated all-solid-state battery shows high electrochemical performance with 99.2% specific capacity retention after 250 cycles at a 0.5 C rate. The results of post galvanostatic charge–discharge analysis confirms that the proposed metal halide-doped LPSI solid electrolyte exhibits improved interfacial stability compared to bare LPSI solid electrolytes.