Scholarlink

<p>Self-excited induction generators (SEIGs) are extensively used in isolated micro-hydro and wind energy systems due to their rugged construction, low maintenance, and inherent short-circuit protection. However, the determination of optimal excitation capacitance remains a challenging nonlinear problem. The capacitor value directly governs voltage buildup, steady-state regulation, operating frequency, and power quality under varying speed and load conditions. This paper proposes a hybrid Grey Wolf Optimizer–Differential Evolution (GWO-DE) algorithm for optimal capacitor value calculation in three-phase SEIGs. The capacitor selection is formulated as a constrained single-objective optimization problem. Three design criteria (voltage-regulation quality, operating-speed range, and capacitor cost) are combined a priori through a fixed weighted-sum scalarization, based on the steady-state per-phase equivalent circuit incorporating core losses and a fifth-order polynomial magnetizing characteristic. An adaptive switching parameter transitions the search from GWO-dominant exploration to DE-dominant exploitation, while an elite archive and stagnation-triggered reinitialization prevent premature convergence. The proposed GWO-DE is benchmarked against PSO, standard GWO, GA, and Nelder-Mead across 24 operating conditions spanning six speed levels and four load levels. All reported optimization metrics are obtained from 30 independent runs. Results demonstrate that GWO-DE achieves 3.07× better mean fitness than PSO, 15.18× better than standard GWO, and 22.92× better than GA, with 38.7% faster convergence than PSO. The optimized capacitor maintains terminal voltage within ±5% of rated value up to 85% load, with voltage THD compliant with IEEE 519 limits. Experimental validation on a 3.7&#xa0;kW laboratory SEIG prototype using a Fluke 435-II power quality analyzer confirms the predictions with an average error of 2.32%. A capacitor value contour map across the speed-load space is provided as a practical design tool for field installations.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Optimal capacitor value calculation for self excited induction generators using hybrid grey wolf differential evolution optimization with experimental validation

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年7月21日

查看全文
  • Sanket Prakash Jadhav,
  • Mrinal Kanti Rajak,
  • Meenakshi Mukund Pawar,
  • Rajen Pudur

摘要

Self-excited induction generators (SEIGs) are extensively used in isolated micro-hydro and wind energy systems due to their rugged construction, low maintenance, and inherent short-circuit protection. However, the determination of optimal excitation capacitance remains a challenging nonlinear problem. The capacitor value directly governs voltage buildup, steady-state regulation, operating frequency, and power quality under varying speed and load conditions. This paper proposes a hybrid Grey Wolf Optimizer–Differential Evolution (GWO-DE) algorithm for optimal capacitor value calculation in three-phase SEIGs. The capacitor selection is formulated as a constrained single-objective optimization problem. Three design criteria (voltage-regulation quality, operating-speed range, and capacitor cost) are combined a priori through a fixed weighted-sum scalarization, based on the steady-state per-phase equivalent circuit incorporating core losses and a fifth-order polynomial magnetizing characteristic. An adaptive switching parameter transitions the search from GWO-dominant exploration to DE-dominant exploitation, while an elite archive and stagnation-triggered reinitialization prevent premature convergence. The proposed GWO-DE is benchmarked against PSO, standard GWO, GA, and Nelder-Mead across 24 operating conditions spanning six speed levels and four load levels. All reported optimization metrics are obtained from 30 independent runs. Results demonstrate that GWO-DE achieves 3.07× better mean fitness than PSO, 15.18× better than standard GWO, and 22.92× better than GA, with 38.7% faster convergence than PSO. The optimized capacitor maintains terminal voltage within ±5% of rated value up to 85% load, with voltage THD compliant with IEEE 519 limits. Experimental validation on a 3.7 kW laboratory SEIG prototype using a Fluke 435-II power quality analyzer confirms the predictions with an average error of 2.32%. A capacitor value contour map across the speed-load space is provided as a practical design tool for field installations.