Scholarlink

<p>The improper disposal of waste lubricating oil (WLO) represents a significant environmental hazard and contributes to the depletion of petroleum resources. This study investigates the re-refining of WLO via an acid–clay treatment process and optimizes the key operating parameters using response surface methodology (RSM). The effects of temperature (30–60&#xa0;°C), acid-to-oil ratio (10–25% v/v), and reaction time (60–120&#xa0;min) were evaluated on yield, density, and kinematic viscosity. Quadratic regression models demonstrated strong statistical significance, with coefficients of determination of 0.87, 0.98, and 0.99 for viscosity, density, and yield, respectively. Optimal refining conditions were identified at 45&#xa0;°C, 19% acid-to-oil ratio, and 101&#xa0;min reaction time. The refined oil exhibited markedly improved physicochemical properties, including flash point (232&#xa0;°C), viscosity index (126.7), ash content (0.04%), carbon residue (0.05%), and water content below 0.01 wt %. Fourier transform infrared spectroscopy confirmed close similarity between the refined and commercial base oil. The findings demonstrate that acid–clay re-refining, combined with statistical optimization, provides an efficient and economically viable route for the sustainable recovery of lubricating oil from waste streams.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Optimization of acid–clay re-refining of waste lubricating oil using response surface methodology

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年7月2日

查看全文
  • Kareem M. Tharwat,
  • Fatma H. Ashour,
  • Noura F. Abdelsalam,
  • Shereen M. S. Abdel-hamid,
  • Mamdouh A. Gadalla,
  • Hany A. Elazab

摘要

The improper disposal of waste lubricating oil (WLO) represents a significant environmental hazard and contributes to the depletion of petroleum resources. This study investigates the re-refining of WLO via an acid–clay treatment process and optimizes the key operating parameters using response surface methodology (RSM). The effects of temperature (30–60 °C), acid-to-oil ratio (10–25% v/v), and reaction time (60–120 min) were evaluated on yield, density, and kinematic viscosity. Quadratic regression models demonstrated strong statistical significance, with coefficients of determination of 0.87, 0.98, and 0.99 for viscosity, density, and yield, respectively. Optimal refining conditions were identified at 45 °C, 19% acid-to-oil ratio, and 101 min reaction time. The refined oil exhibited markedly improved physicochemical properties, including flash point (232 °C), viscosity index (126.7), ash content (0.04%), carbon residue (0.05%), and water content below 0.01 wt %. Fourier transform infrared spectroscopy confirmed close similarity between the refined and commercial base oil. The findings demonstrate that acid–clay re-refining, combined with statistical optimization, provides an efficient and economically viable route for the sustainable recovery of lubricating oil from waste streams.