Scholarlink

<p>This study quantitatively investigates the measurable thermal bridging effect induced by mechanical anchors in External Thermal Insulation Composite Systems (ETICS) and its dual impact on building energy consumption and structural safety. The simulation results revealed that aluminum anchors (5 pcs/m²) increased the equivalent thermal conductivity (λ<sub>e</sub>) of a 35&#xa0;mm XPS insulation layer by 93.3% (from 0.03 to 0.058&#xa0;W/(m K)). The effect is amplified for high-performance insulation materials; for Vacuum Insulation Panels (VIP, λ = 0.004&#xa0;W/(m K)), λ<sub>e</sub> increased by 675%. Crucially, material selection is the dominant parameter: switching to nylon anchors reduced the thermal bridging effect to less than 0.5%. Transient simulations further identified localized temperature differentials exceeding 18.85&#xa0;°C at anchor points, generating thermomechanical stress that accelerates aging and poses detachment risks. In a kindergarten case study, the aluminum anchor effect raised the annual energy consumption by 3.59% (2.06 kWh/(m<sup>2</sup>&#xa0;a)). This work provides a novel multi-scale assessment framework, concluding that anchor-induced thermal bridging is a critical design trade-off, and advocates for optimizing anchor material (low thermal conductivity) and geometry (reduced diameter/density) to balance structural integrity with thermal performance in modern building envelope retrofits.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Thermal and energy impacts of mechanical anchors in External Thermal Insulation Composite Systems (ETICS)

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年7月6日

查看全文
  • Yu Wang,
  • Ru Ji,
  • Lan Qiao,
  • Ya Yin

摘要

This study quantitatively investigates the measurable thermal bridging effect induced by mechanical anchors in External Thermal Insulation Composite Systems (ETICS) and its dual impact on building energy consumption and structural safety. The simulation results revealed that aluminum anchors (5 pcs/m²) increased the equivalent thermal conductivity (λe) of a 35 mm XPS insulation layer by 93.3% (from 0.03 to 0.058 W/(m K)). The effect is amplified for high-performance insulation materials; for Vacuum Insulation Panels (VIP, λ = 0.004 W/(m K)), λe increased by 675%. Crucially, material selection is the dominant parameter: switching to nylon anchors reduced the thermal bridging effect to less than 0.5%. Transient simulations further identified localized temperature differentials exceeding 18.85 °C at anchor points, generating thermomechanical stress that accelerates aging and poses detachment risks. In a kindergarten case study, the aluminum anchor effect raised the annual energy consumption by 3.59% (2.06 kWh/(m2 a)). This work provides a novel multi-scale assessment framework, concluding that anchor-induced thermal bridging is a critical design trade-off, and advocates for optimizing anchor material (low thermal conductivity) and geometry (reduced diameter/density) to balance structural integrity with thermal performance in modern building envelope retrofits.