Scholarlink

<p>We developed and validated a rapid method for degrading plastic into smaller molecular fragments using light. In this method, near-infrared (NIR) laser light is used to degrade particles with minimal energy consumption. Polyethylene terephthalate (PET) was selected as the model polymer for this study. PET exhibits no absorption in the near-infrared region; therefore, a photosensitizer is necessary to absorb it. Materials must have sufficient energy levels to absorb near-infrared light to meet the requirements for selecting photosensitizers. PET degradation is initiated when the photosensitizer’s absorbed energy is transferred to the bond dissociation limit of the polymer’s targeted chemical bonds. In this investigation, we used three different photosensitizers: magnesium diboride (MgB<sub>2</sub>), graphite, and titanium diboride (TiB<sub>2</sub>). Using cyclic voltammetry, we determined the lowest unoccupied molecular orbital (LUMO) levels of the photosensitizers. Among three photosensitizers, the LUMO level of MgB<sub>2</sub> nearly matches the PET’s bond dissociation limit. Hence, if we mix PET with MgB<sub>2</sub>, polymer degradation will occur even at ordinary temperature and pressure for a modest level of light intensity if the energy transfer between MgB<sub>2</sub> and PET is resonant. Using a 3&#xa0;W NIR laser, we demonstrate 60% mass loss of PET with MgB<sub>2</sub> photosensitizer. The degradation of the PET with MgB<sub>2</sub> photosensitizer was verified by gas chromatography-mass spectrometry (GC-MS) analysis. Thus, the demonstrated NIR laser-assisted PET degradation using photosensitizers serves as one of the green photonics solutions to the PET plastic problems.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Near-infrared laser-induced plastic (polyethylene terephthalate (PET)) degradation with photosensitizers based on resonant energy transfer mechanism

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年6月30日

查看全文
  • P. Christy Antony,
  • N. Yogesh

摘要

We developed and validated a rapid method for degrading plastic into smaller molecular fragments using light. In this method, near-infrared (NIR) laser light is used to degrade particles with minimal energy consumption. Polyethylene terephthalate (PET) was selected as the model polymer for this study. PET exhibits no absorption in the near-infrared region; therefore, a photosensitizer is necessary to absorb it. Materials must have sufficient energy levels to absorb near-infrared light to meet the requirements for selecting photosensitizers. PET degradation is initiated when the photosensitizer’s absorbed energy is transferred to the bond dissociation limit of the polymer’s targeted chemical bonds. In this investigation, we used three different photosensitizers: magnesium diboride (MgB2), graphite, and titanium diboride (TiB2). Using cyclic voltammetry, we determined the lowest unoccupied molecular orbital (LUMO) levels of the photosensitizers. Among three photosensitizers, the LUMO level of MgB2 nearly matches the PET’s bond dissociation limit. Hence, if we mix PET with MgB2, polymer degradation will occur even at ordinary temperature and pressure for a modest level of light intensity if the energy transfer between MgB2 and PET is resonant. Using a 3 W NIR laser, we demonstrate 60% mass loss of PET with MgB2 photosensitizer. The degradation of the PET with MgB2 photosensitizer was verified by gas chromatography-mass spectrometry (GC-MS) analysis. Thus, the demonstrated NIR laser-assisted PET degradation using photosensitizers serves as one of the green photonics solutions to the PET plastic problems.