Scholarlink

<p>This study presents a novel battery thermal management approach for large-format pouch-type lithium-ion batteries (LIBs) commonly used in electric vehicles. A composite housing structure consisting of <InlineEquation ID="IEq1"><EquationSource Format="TEX">\({Al}_{2}{O}_{3}\)</EquationSource></InlineEquation> foam filled with a nano-enhanced phase change material (NPCM), a mixture of n-octadecane and copper nanoparticles, was investigated using numerical simulations under different C-rates (0.5C, 1C, 1.5C, and 2C) and foam porosities (0.90, 0.92, 0.94, 0.96, and 0.98). The <InlineEquation ID="IEq2"><EquationSource Format="TEX">\({Al}_{2}{O}_{3}\)</EquationSource></InlineEquation> foam increases the effective surface area and thermal conductivity, while the copper nanoparticles mitigate the low thermal conductivity of pure PCM. Results show that this hybrid system significantly reduces maximum battery temperature, delays temperature rise through latent heat absorption, and improves temperature uniformity. Increasing the C-rate, especially from 1.5 to 2, intensifies heat generation, while lower porosity (<InlineEquation ID="IEq3"><EquationSource Format="TEX">\(\varepsilon =0.9\)</EquationSource></InlineEquation>) enhances thermal performance by redistributing heat toward the cell center. The proposed NPCM–<InlineEquation ID="IEq4"><EquationSource Format="TEX">\({Al}_{2}{O}_{3}\)</EquationSource></InlineEquation> foam configuration offers a promising strategy to enhance the safety, efficiency, and longevity of high-capacity LIBs in electric vehicle applications.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Thermal management of pouch-type lithium-ion batteries using aluminum oxide porous media filled with nano-enhanced PCM

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年7月1日

查看全文
  • Fares Suliaman Alromithy,
  • Ali B. M. Ali,
  • Omar J. Alkhatib,
  • Pradeep Kumar Singh,
  • Shimaa A. Hussien,
  • Hamdi Ayed,
  • Farzona Tursunzoda,
  • Mahidzal Dahari,
  • Ibrahim Mahariq

摘要

This study presents a novel battery thermal management approach for large-format pouch-type lithium-ion batteries (LIBs) commonly used in electric vehicles. A composite housing structure consisting of \({Al}_{2}{O}_{3}\) foam filled with a nano-enhanced phase change material (NPCM), a mixture of n-octadecane and copper nanoparticles, was investigated using numerical simulations under different C-rates (0.5C, 1C, 1.5C, and 2C) and foam porosities (0.90, 0.92, 0.94, 0.96, and 0.98). The \({Al}_{2}{O}_{3}\) foam increases the effective surface area and thermal conductivity, while the copper nanoparticles mitigate the low thermal conductivity of pure PCM. Results show that this hybrid system significantly reduces maximum battery temperature, delays temperature rise through latent heat absorption, and improves temperature uniformity. Increasing the C-rate, especially from 1.5 to 2, intensifies heat generation, while lower porosity (\(\varepsilon =0.9\)) enhances thermal performance by redistributing heat toward the cell center. The proposed NPCM–\({Al}_{2}{O}_{3}\) foam configuration offers a promising strategy to enhance the safety, efficiency, and longevity of high-capacity LIBs in electric vehicle applications.