Scholarlink

<p>We report a materials-engineering strategy to enhance triboelectric nanogenerator (TENG) output by embedding a ternary g-C₃N₄/TiO₂@polyaniline (GTP) nanocomposite into PVDF tribopositive electrodes and pairing them with PTFE tribonegative layers of systematically varied composition from 30 to 60 wt%). XPS, TEM, FESEM/EDX, UV–Vis, and DSC confirm that TiO₂ nanoparticles are well distributed on g-C₃N₄ nanosheets and interconnected through a conducting PANI network, with evidence of interfacial Ti–O–C/Ti–N bonding, Ti<sup>3</sup>⁺ associated defect states, and band-tail absorption (Urbach energy, E<sub>U</sub> = 0.31 eV), indicating localized electronic states that support charge storage/transfer.” In vertical contact–separation mode, the devices exhibit a composition-dependent trade-off: the 30 wt% PTFE configuration delivers the highest short-circuit current (Isc = 2.86 μA) and peak power (P<sub>max</sub> = 10.3 μW), whereas the 60 wt% PTFE device yields the maximum open-circuit voltage (Voc = 4.56 V). These results demonstrate that voltage–current characteristics can be tuned through interfacial state engineering and controlled adjustment of the tribonegative layer composition. To confirm repeatability and stability under manual tapping, the best-performing 30 wt% and 60 wt% devices has been validated using an automated cycle-resolved statistical analysis.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

The ternary nanocomposite g-C3N4/TiO2@polyaniline embedded in PVDF based triboelectric nanogenerator for energy harvesting

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年5月18日

查看全文
  • Ashok Kumar Swami,
  • Nelapati Avinash,
  • Deepak Verma

摘要

We report a materials-engineering strategy to enhance triboelectric nanogenerator (TENG) output by embedding a ternary g-C₃N₄/TiO₂@polyaniline (GTP) nanocomposite into PVDF tribopositive electrodes and pairing them with PTFE tribonegative layers of systematically varied composition from 30 to 60 wt%). XPS, TEM, FESEM/EDX, UV–Vis, and DSC confirm that TiO₂ nanoparticles are well distributed on g-C₃N₄ nanosheets and interconnected through a conducting PANI network, with evidence of interfacial Ti–O–C/Ti–N bonding, Ti3⁺ associated defect states, and band-tail absorption (Urbach energy, EU = 0.31 eV), indicating localized electronic states that support charge storage/transfer.” In vertical contact–separation mode, the devices exhibit a composition-dependent trade-off: the 30 wt% PTFE configuration delivers the highest short-circuit current (Isc = 2.86 μA) and peak power (Pmax = 10.3 μW), whereas the 60 wt% PTFE device yields the maximum open-circuit voltage (Voc = 4.56 V). These results demonstrate that voltage–current characteristics can be tuned through interfacial state engineering and controlled adjustment of the tribonegative layer composition. To confirm repeatability and stability under manual tapping, the best-performing 30 wt% and 60 wt% devices has been validated using an automated cycle-resolved statistical analysis.