Scholarlink

<p>The performance of perovskite solar cells (PSCs) is strongly governed by device architecture and the optoelectronic properties of constituent materials. In this work, a two-dimensional (2D) finite element method (FEM) simulation is employed to investigate a single-junction PSC incorporating a stacked bilayer perovskite absorber and engineered hole transport layers (HTLs), with the aim of enhancing light harvesting and charge transport.To extend the absorption spectrum, a bilayer absorber composed of MAPbI₃ and MASnI₃ is introduced, leading to an increase in short-circuit current density (J<sub>sc</sub>) from 17.5 to 18.34&#xa0;mA/cm<sup>2</sup> and an improvement in power conversion efficiency (PCE) from 13.31 to 15.01%. The MASnI<sub>3</sub> layer primarily acts as a complementary absorber in the near-infrared region while simultaneously modifying the interfacial band alignment, resulting in reduced non-radiative recombination losses. Furthermore, poly(3-hexylthiophene) (P3HT) and P3HT/graphene (P3HT/Gr) nanocomposites with graphene weight ratios of 1, 3, and 5% are employed as HTLs to improve carrier extraction. The incorporation of graphene enhances charge transport through increased electrical conductivity and percolation-assisted pathways within the HTL. The optimized device with 5% graphene-doped P3HT exhibits an open-circuit voltage (V<sub>oc</sub>) of 1.025&#xa0;V and a maximum PCE of 17.79%. These results demonstrate that the synergistic integration of a bilayer perovskite absorber and graphene-enhanced HTLs provides an effective strategy for improving PSC performance while maintaining a single-junction device architecture.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Design and numerical investigation of perovskite solar cells with stacked bilayer absorber and P3HT/graphene hole transport layer

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年5月4日

查看全文
  • Mehran Dadashbeik,
  • Mehdi Eskandari,
  • Davood Fathi

摘要

The performance of perovskite solar cells (PSCs) is strongly governed by device architecture and the optoelectronic properties of constituent materials. In this work, a two-dimensional (2D) finite element method (FEM) simulation is employed to investigate a single-junction PSC incorporating a stacked bilayer perovskite absorber and engineered hole transport layers (HTLs), with the aim of enhancing light harvesting and charge transport.To extend the absorption spectrum, a bilayer absorber composed of MAPbI₃ and MASnI₃ is introduced, leading to an increase in short-circuit current density (Jsc) from 17.5 to 18.34 mA/cm2 and an improvement in power conversion efficiency (PCE) from 13.31 to 15.01%. The MASnI3 layer primarily acts as a complementary absorber in the near-infrared region while simultaneously modifying the interfacial band alignment, resulting in reduced non-radiative recombination losses. Furthermore, poly(3-hexylthiophene) (P3HT) and P3HT/graphene (P3HT/Gr) nanocomposites with graphene weight ratios of 1, 3, and 5% are employed as HTLs to improve carrier extraction. The incorporation of graphene enhances charge transport through increased electrical conductivity and percolation-assisted pathways within the HTL. The optimized device with 5% graphene-doped P3HT exhibits an open-circuit voltage (Voc) of 1.025 V and a maximum PCE of 17.79%. These results demonstrate that the synergistic integration of a bilayer perovskite absorber and graphene-enhanced HTLs provides an effective strategy for improving PSC performance while maintaining a single-junction device architecture.