Scholarlink

<p>The uncontrolled release of lead (Pb<sup>2+</sup>) into water bodies presents a major risk to both environmental integrity and human health, owing to its high toxicity, long-term stability, and tendency to accumulate in living organisms. Addressing this challenge, the present study reports the synthesis of a novel, eco-compatible bioinorganic composite—Chitosan–Tannic Acid@MIL-101(Cr) (CS-TA@MIL-101)—designed for efficient Pb<sup>2+</sup> adsorption from aqueous media. The composite integrates the high surface area of MIL-101(Cr) with the functional versatility of chitosan and tannic acid via in situ self-assembly. Characterization by FTIR, XRD, SEM, TGA, and BET confirmed the formation of a stable, hierarchically porous material with a surface area of 884.8 ± 3.6&#xa0;m²/g, pore volume of 0.58 ± 0.02 cm<sup>3</sup>/g, and dual micro-/mesoporosity. Batch experiments demonstrated a maximum Pb²⁺ adsorption capacity of 317.6 ± 1.9&#xa0;mg/g and removal efficiency of 98.88 ± 0.7%. Kinetic data fit both nonlinear and linear pseudo-second-order (PSO) models with R<sup>2</sup> = 0.998/0.997 and RMSE = 0.78/1.03, indicating a chemisorption mechanism. Isothermal studies followed the Langmuir model with R<sup>2</sup> = 0.999/0.998 and RMSE = 0.93/1.08, suggesting monolayer adsorption. Thermodynamic analysis confirmed spontaneous and endothermic behavior (ΔH° = 85.84 ± 2.74&#xa0;kJ/mol). After undergoing six regeneration cycles, the composite maintained an efficiency of 90.24 ± 0.6%, highlighting its strong reusability and suitability for long-term, eco-friendly water purification efforts.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

In situ assembled MIL-101(Cr) composite functionalized with chitosan and tannic acid as an efficient adsorbent for Pb2+ removal from aqueous solutions

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年3月25日

查看全文
  • Mohamed Hemdan,
  • Eman Fayad,
  • Dalal Nasser Binjawhar,
  • Haitham lbrahim El-Mekkawy,
  • H. S. Ali,
  • Mahmoud F. Mubarak

摘要

The uncontrolled release of lead (Pb2+) into water bodies presents a major risk to both environmental integrity and human health, owing to its high toxicity, long-term stability, and tendency to accumulate in living organisms. Addressing this challenge, the present study reports the synthesis of a novel, eco-compatible bioinorganic composite—Chitosan–Tannic Acid@MIL-101(Cr) (CS-TA@MIL-101)—designed for efficient Pb2+ adsorption from aqueous media. The composite integrates the high surface area of MIL-101(Cr) with the functional versatility of chitosan and tannic acid via in situ self-assembly. Characterization by FTIR, XRD, SEM, TGA, and BET confirmed the formation of a stable, hierarchically porous material with a surface area of 884.8 ± 3.6 m²/g, pore volume of 0.58 ± 0.02 cm3/g, and dual micro-/mesoporosity. Batch experiments demonstrated a maximum Pb²⁺ adsorption capacity of 317.6 ± 1.9 mg/g and removal efficiency of 98.88 ± 0.7%. Kinetic data fit both nonlinear and linear pseudo-second-order (PSO) models with R2 = 0.998/0.997 and RMSE = 0.78/1.03, indicating a chemisorption mechanism. Isothermal studies followed the Langmuir model with R2 = 0.999/0.998 and RMSE = 0.93/1.08, suggesting monolayer adsorption. Thermodynamic analysis confirmed spontaneous and endothermic behavior (ΔH° = 85.84 ± 2.74 kJ/mol). After undergoing six regeneration cycles, the composite maintained an efficiency of 90.24 ± 0.6%, highlighting its strong reusability and suitability for long-term, eco-friendly water purification efforts.