Scholarlink

<p>This study examines the effects of niobium (Nb) addition and different thermomechanical controlled processing (TMCP) regimes on the flow stress behaviour and microstructure evolution of a newly developed CMnSiAlPMo TRIP-aided bainitic steel. TMCP tests were conducted with various hot deformation passes, followed by austempering at 400&#xa0;°C for 10&#xa0;min using a Gleeble 3800 thermomechanical simulator. Microstructures were analysed using scanning electron microscopy with electron backscattering diffraction and X-ray diffraction. Results showed that increasing the number of passes and reducing the final deformation temperature (FDT) enhanced the flow behaviour for both 0Nb and 0.05Nb alloys, with strain hardening being the dominant mechanism across all regimes. The four-pass regime with an FDT of 850&#xa0;°C for the 0Nb alloy achieved the highest hardness (457 HV), attributed to grain refinement, which was more influential than the retained austenite fraction. For the 0.05Nb alloy, the two-pass regime at 1050&#xa0;°C showed the highest hardness (428 HV), resulting from a lower retained austenite fraction. Additionally, Nb addition significantly refined the microstructure and increased the peak flow stress from 385&#xa0;MPa to 421&#xa0;MPa for the four-pass regime. The prior austenite grain size decreased from 23 to 12&#xa0;μm in the single-pass regime, and the largest grain size in the cumulative grain size distribution (D<sub>90%</sub>) decreased from 8.45 to 7.49&#xa0;μm.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Strategic niobium integration and thermomechanical processing in the advancement of novel CMnSiAlPMo TRIP-aided bainitic steel

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年2月24日

查看全文
  • Hoda Refaiy,
  • Eman El-Shenawy,
  • Jukka Kömi,
  • Mohammed Ali

摘要

This study examines the effects of niobium (Nb) addition and different thermomechanical controlled processing (TMCP) regimes on the flow stress behaviour and microstructure evolution of a newly developed CMnSiAlPMo TRIP-aided bainitic steel. TMCP tests were conducted with various hot deformation passes, followed by austempering at 400 °C for 10 min using a Gleeble 3800 thermomechanical simulator. Microstructures were analysed using scanning electron microscopy with electron backscattering diffraction and X-ray diffraction. Results showed that increasing the number of passes and reducing the final deformation temperature (FDT) enhanced the flow behaviour for both 0Nb and 0.05Nb alloys, with strain hardening being the dominant mechanism across all regimes. The four-pass regime with an FDT of 850 °C for the 0Nb alloy achieved the highest hardness (457 HV), attributed to grain refinement, which was more influential than the retained austenite fraction. For the 0.05Nb alloy, the two-pass regime at 1050 °C showed the highest hardness (428 HV), resulting from a lower retained austenite fraction. Additionally, Nb addition significantly refined the microstructure and increased the peak flow stress from 385 MPa to 421 MPa for the four-pass regime. The prior austenite grain size decreased from 23 to 12 μm in the single-pass regime, and the largest grain size in the cumulative grain size distribution (D90%) decreased from 8.45 to 7.49 μm.