<p>In present study, 15 morphologically different fungi isolated from rhizopheric soils of an industrial area were screened for their Zn<sup>2+</sup> removal efficiency from aqueous solution. Isolate depicting highest potential was molecularly identified as <i>Aspergillus terreus</i> SJP02. Effect of various process parameters viz. biosorbent dose, contact time, temperature, agitation rate, pH and initial Zn<sup>2+</sup> concentration on the fungal sorption capacity were studied. The biosorbent exhibited maximum Zn<sup>2+</sup> sorption capacity of 10.7 <i>±</i> 0.2 mg g<sup>− 1</sup> in 60&#xa0;min. Desorption studies showed 71.46% Zn<sup>2+</sup> recovery rate in 120&#xa0;min with 0.01&#xa0;N HNO<sub>3</sub>, indicating efficient metal recovery for reuse and subsequent reutilization of spent mycosorbents. Acid digestion study suggested adsorption being the primary mechanism accounting for 87% Zn<sup>2+</sup>removal. It was further confirmed by the FE-SEM and EDX analysis. FTIR analysis suggested involvement of amino, hydroxyl, carbonyl, and phosphate functional groups of fungal cell wall in adsorption. The experimental results were in accordance with the tested isotherm and kinetic models, and suggested the role of physical adsorption for Zn<sup>2+</sup> removal. Noteworthy, the present study showed better sorption capacity in considerably shorter equilibration time compared to previous reports and advocate potential utilization of <i>A. terreus</i> SJP02 for bioremediation of Zn<sup>2+</sup> contaminated wastewater at industrial scale.</p>

错误:搜索内容不能为空,请输入英文关键词
错误:关键词超出字数限制,请精简
高级检索

Unveiling the potential of Aspergillus terreus SJP02 for zinc remediation and its driving mechanism

  • Shobham,
  • Vishalakshi Bhanot,
  • Mamta,
  • Sanjay Kumar Verma,
  • Suresh Gupta,
  • Jitendra Panwar

摘要

In present study, 15 morphologically different fungi isolated from rhizopheric soils of an industrial area were screened for their Zn2+ removal efficiency from aqueous solution. Isolate depicting highest potential was molecularly identified as Aspergillus terreus SJP02. Effect of various process parameters viz. biosorbent dose, contact time, temperature, agitation rate, pH and initial Zn2+ concentration on the fungal sorption capacity were studied. The biosorbent exhibited maximum Zn2+ sorption capacity of 10.7 ± 0.2 mg g− 1 in 60 min. Desorption studies showed 71.46% Zn2+ recovery rate in 120 min with 0.01 N HNO3, indicating efficient metal recovery for reuse and subsequent reutilization of spent mycosorbents. Acid digestion study suggested adsorption being the primary mechanism accounting for 87% Zn2+removal. It was further confirmed by the FE-SEM and EDX analysis. FTIR analysis suggested involvement of amino, hydroxyl, carbonyl, and phosphate functional groups of fungal cell wall in adsorption. The experimental results were in accordance with the tested isotherm and kinetic models, and suggested the role of physical adsorption for Zn2+ removal. Noteworthy, the present study showed better sorption capacity in considerably shorter equilibration time compared to previous reports and advocate potential utilization of A. terreus SJP02 for bioremediation of Zn2+ contaminated wastewater at industrial scale.