Scholarlink

<p>This work reports on the preparation process of a double-layer perovskite active layer. The first active layer film, Cs<sub>2.9</sub>K<sub>0.2</sub>PEA<sub>0.4</sub>Pb<sub>2</sub>I<sub>3.9</sub>Br<sub>3.6</sub>, was fabricated using a spin-coating method, while the second active layer, MAPbBr<sub>3</sub>, was deposited using MAPbBr<sub>3</sub> single crystals as the evaporation source. Additionally, doping the PEDOT: PSS hole transport layer with ETA and EDA can enhance the uniformity of the perovskite film and reduce voids, improving charge transport efficiency. It proposed the use of an MABr layer to passivate the device interface structure, enhancing the injection and recombination efficiency of charge carriers. In the study of the single-layer Cs<sub>2.9</sub>K<sub>0.2</sub>PEA<sub>0.4</sub>Pb<sub>2</sub>I<sub>3.9</sub>Br<sub>3.6</sub> perovskite, the optimized brightness reached 513.4&#xa0;cd/m², with an external quantum efficiency (EQE) of 0.24% after doping and modification. When the second active layer MAPbBr<sub>3</sub> was introduced, the results showed that as the voltage increased from 4&#xa0;V to 10&#xa0;V, the LED emission color changed from orange-red to green. This change was attributed to the variation in the recombination positions of charge carriers in different bandgap materials at different voltages. At low voltage, carriers recombine in the layer with a smaller bandgap, emitting red light; whereas at high voltage, carriers recombine in the layer with a larger bandgap, emitting green light.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Hybrid spin coating and evaporation techniques for fabricating double-layer stacked dual-color perovskite LEDs

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年1月7日

查看全文
  • Ching-Ho Tien,
  • Jen-Yu Fang,
  • Lung-Chien Chen

摘要

This work reports on the preparation process of a double-layer perovskite active layer. The first active layer film, Cs2.9K0.2PEA0.4Pb2I3.9Br3.6, was fabricated using a spin-coating method, while the second active layer, MAPbBr3, was deposited using MAPbBr3 single crystals as the evaporation source. Additionally, doping the PEDOT: PSS hole transport layer with ETA and EDA can enhance the uniformity of the perovskite film and reduce voids, improving charge transport efficiency. It proposed the use of an MABr layer to passivate the device interface structure, enhancing the injection and recombination efficiency of charge carriers. In the study of the single-layer Cs2.9K0.2PEA0.4Pb2I3.9Br3.6 perovskite, the optimized brightness reached 513.4 cd/m², with an external quantum efficiency (EQE) of 0.24% after doping and modification. When the second active layer MAPbBr3 was introduced, the results showed that as the voltage increased from 4 V to 10 V, the LED emission color changed from orange-red to green. This change was attributed to the variation in the recombination positions of charge carriers in different bandgap materials at different voltages. At low voltage, carriers recombine in the layer with a smaller bandgap, emitting red light; whereas at high voltage, carriers recombine in the layer with a larger bandgap, emitting green light.