Scholarlink

<p>When teeth are extensively injured, the restoration of Endodontically Treated Teeth (ETT) presents substantial obstacles. For these restorations to be successful over the long term, it is essential to ensure appropriate retention and resistance to fracture. The purpose of this study is to use 3D finite element analysis (FEA) to assess the stress distribution in severely damaged ETT following the installation of single versus double titanium posts. Cone beam computed tomography (CBCT) was used to scan an undamaged human mandibular first molar. Three post designs were examined; Model D received one distal post, Model DMB had two posts; distal and mesiobuccal posts, and Model DML included two posts; distal and mesiolingual posts. FEA was used to examine stress distribution and evaluate maximum stress at six areas: occlusal surface, finish line, furcation area, and along the root canal length at 7&#xa0;mm, 5&#xa0;mm, and 3&#xa0;mm from the apex. Model D recorded the highest stress values at all assessed locations, while Model DML reported the least stress values. Model DMB showed intermediate levels of stress. When compared to a single post, the use of two posts considerably reduced stress concentrations, especially when inserted in the distal and mesiolingual canals. FEA proved to be a useful tool in evaluating and directing clinical decisions for repairing ETT. Occlusal surface followed by finish line locations reported the highest stress values in all tested models.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Generated stresses finite element analysis of restored endodontically treated molar using single versus double titanium posts

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年11月28日

查看全文
  • Mai Soliman,
  • Amal Abdallah A. Abo-Elmagd,
  • Elzahraa Eldwakhly,
  • Alhanoof Aldegheishem,
  • Manal M. Abdelhafeez

摘要

When teeth are extensively injured, the restoration of Endodontically Treated Teeth (ETT) presents substantial obstacles. For these restorations to be successful over the long term, it is essential to ensure appropriate retention and resistance to fracture. The purpose of this study is to use 3D finite element analysis (FEA) to assess the stress distribution in severely damaged ETT following the installation of single versus double titanium posts. Cone beam computed tomography (CBCT) was used to scan an undamaged human mandibular first molar. Three post designs were examined; Model D received one distal post, Model DMB had two posts; distal and mesiobuccal posts, and Model DML included two posts; distal and mesiolingual posts. FEA was used to examine stress distribution and evaluate maximum stress at six areas: occlusal surface, finish line, furcation area, and along the root canal length at 7 mm, 5 mm, and 3 mm from the apex. Model D recorded the highest stress values at all assessed locations, while Model DML reported the least stress values. Model DMB showed intermediate levels of stress. When compared to a single post, the use of two posts considerably reduced stress concentrations, especially when inserted in the distal and mesiolingual canals. FEA proved to be a useful tool in evaluating and directing clinical decisions for repairing ETT. Occlusal surface followed by finish line locations reported the highest stress values in all tested models.