Scholarlink

<p>In this study, three types of metamaterial cells, including honeycomb, cubic, and tetrachiral, were selected based on their high performance under compression test. Then, different arrangements of these cells created four new metamaterial structures named HT, HC, TC, and HTC. Because the aim of this research is to maximize specific energy absorption (SEA), cells were chosen based on their mechanical properties. After that, the structures were manufactured with a 3D printer, and compression tests were performed on them. Results showed that the HT structure had the highest SEA, followed by HTC, HC, and TC. Moreover, these structures have a higher SEA than solid specimens and many other metamaterial structures. In addition, all of them had negative Poisson’s ratios between − 1 and − 1.7.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Study of novel 3D-Printed auxetic metamaterial structures under compressive loading: design, simulation, and experiment

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年10月30日

查看全文
  • Amir Shahmorad,
  • Ramin Hashemi,
  • Majid Rajabi

摘要

In this study, three types of metamaterial cells, including honeycomb, cubic, and tetrachiral, were selected based on their high performance under compression test. Then, different arrangements of these cells created four new metamaterial structures named HT, HC, TC, and HTC. Because the aim of this research is to maximize specific energy absorption (SEA), cells were chosen based on their mechanical properties. After that, the structures were manufactured with a 3D printer, and compression tests were performed on them. Results showed that the HT structure had the highest SEA, followed by HTC, HC, and TC. Moreover, these structures have a higher SEA than solid specimens and many other metamaterial structures. In addition, all of them had negative Poisson’s ratios between − 1 and − 1.7.