<p>The solubility of nilotinib hydrochloride monohydrate in supercritical CO₂ was measured at four temperatures between 338&#xa0;K and 308&#xa0;K, and seven pressures between 12&#xa0;MPa and 30&#xa0;MPa, using ethanol as a cosolvent. Both semi-empirical and empirical approaches were employed to analyze the experimental data. In the ternary systems studied, the solubility values (mole basis) for nilotinib hydrochloride monohydrate were between 1.08 × 10<sup>− 5</sup> and 4.15 × 10<sup>− 4</sup> (10.8 to 415 PPM). The results indicated a significant increase in solubility with the incorporation of ethanol. The peak solubility of nilotinib hydrochloride monohydrate was recorded in the ternary system at 338&#xa0;K and 12&#xa0;MPa, which was approximately 10.8 times its solubility in supercritical carbon dioxide alone under identical conditions. The best fit for the data, as measured by the average absolute relative deviation percentage (<i>AARD</i>%), was achieved using the methods proposed by MST.</p>

错误:搜索内容不能为空,请输入英文关键词
错误:关键词超出字数限制,请精简
高级检索

Nilotinib hydrochloride monohydrate solubility in supercritical carbon dioxide + cosolvent: measurements and modeling

  • Seyed Ali Sajadian,
  • Adel Noubigh,
  • Mahshid Askarizadeh,
  • L. Antonio Estévez

摘要

The solubility of nilotinib hydrochloride monohydrate in supercritical CO₂ was measured at four temperatures between 338 K and 308 K, and seven pressures between 12 MPa and 30 MPa, using ethanol as a cosolvent. Both semi-empirical and empirical approaches were employed to analyze the experimental data. In the ternary systems studied, the solubility values (mole basis) for nilotinib hydrochloride monohydrate were between 1.08 × 10− 5 and 4.15 × 10− 4 (10.8 to 415 PPM). The results indicated a significant increase in solubility with the incorporation of ethanol. The peak solubility of nilotinib hydrochloride monohydrate was recorded in the ternary system at 338 K and 12 MPa, which was approximately 10.8 times its solubility in supercritical carbon dioxide alone under identical conditions. The best fit for the data, as measured by the average absolute relative deviation percentage (AARD%), was achieved using the methods proposed by MST.