Scholarlink

<p>The potential of <i>Pterocladia capillacea</i>, a marine red seaweed, as a sustainable and eco-friendly adsorbent was investigated for the removal of toxic hexavalent chromium Cr(VI) (or Cr<sup>6+</sup>) and crystal violet dye (CVD) from contaminated water. Characterization of <i>P. capillacea</i> using Fourier-Transform Infrared (FTIR), Scanning Electron Microscopy (SEM), and Brunauer-Emmett-Teller (BET) analysis revealed a porous structure with a high specific surface area (87.17&#xa0;m²/g) and a negative surface charge (-29.5 mV), ideal for adsorbent applications. Adsorption studies were conducted to assess the impact of operational parameters, such as pH, adsorbent dose, initial pollutant concentration, and temperature. Optimal removal was achieved at pH 1.0 for Cr<sup>6+</sup> and CVD. Increasing the adsorbent dose led to higher Cr<sup>6+</sup> adsorption, achieving near-complete removal with 0.4&#xa0;g. An optimal dose of 0.8&#xa0;g was selected for subsequent experiments. Cr<sup>6+</sup> Cr<sup>6+</sup> removal was faster during the initial adsorption stage (within 30–60&#xa0;min), followed by a slower rate due to saturation and reduced pore diffusion. Adsorption was more effective at lower temperatures and followed pseudo-second-order kinetics, suggesting chemisorption as the dominant mechanism. Six isotherm models were used to describe equilibrium adsorption, with the Freundlich model providing the best fit for both Cr<sup>6+</sup> and CVD, indicating multilayer adsorption and heterogeneous surface interactions. <i>P. capillacea</i> showed potential for Cr<sup>6+</sup> removal in seawater and real wastewater, although efficiency was reduced due to complex matrix effects. Reusability studies indicated a decline in efficiency over multiple cycles; however, Cr<sup>6+</sup> uptake remained above 89.2% for CVD. Similar reusability was observed, with an initial removal efficiency of 87.29% for CFD. Although removal efficiency decreased in subsequent cycles, the material remained effective for repeated CVD adsorption. The study demonstrates the potential of <i>P. capillacea</i> as a readily available, cost-effective, and sustainable material for the bioremediation of Cr<sup>6+</sup> and synthetic dyes from water, contributing to the development of environmentally friendly water treatment technologies.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Applications of marine red seaweed Pterocladia capillacea biomass in removal of hexavalent chromium and crystal violet dye from several wastewaters

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年9月12日

查看全文
  • Ahmed E. Alprol,
  • Ahmed Bakr,
  • Sameerah I. Al-Saeedi,
  • Ahmed A. El-Shafei,
  • Fahd Alotaibi,
  • Ehab El-Haron,
  • Maymounah N. Alharthi,
  • Ashour Mohamed

摘要

The potential of Pterocladia capillacea, a marine red seaweed, as a sustainable and eco-friendly adsorbent was investigated for the removal of toxic hexavalent chromium Cr(VI) (or Cr6+) and crystal violet dye (CVD) from contaminated water. Characterization of P. capillacea using Fourier-Transform Infrared (FTIR), Scanning Electron Microscopy (SEM), and Brunauer-Emmett-Teller (BET) analysis revealed a porous structure with a high specific surface area (87.17 m²/g) and a negative surface charge (-29.5 mV), ideal for adsorbent applications. Adsorption studies were conducted to assess the impact of operational parameters, such as pH, adsorbent dose, initial pollutant concentration, and temperature. Optimal removal was achieved at pH 1.0 for Cr6+ and CVD. Increasing the adsorbent dose led to higher Cr6+ adsorption, achieving near-complete removal with 0.4 g. An optimal dose of 0.8 g was selected for subsequent experiments. Cr6+ Cr6+ removal was faster during the initial adsorption stage (within 30–60 min), followed by a slower rate due to saturation and reduced pore diffusion. Adsorption was more effective at lower temperatures and followed pseudo-second-order kinetics, suggesting chemisorption as the dominant mechanism. Six isotherm models were used to describe equilibrium adsorption, with the Freundlich model providing the best fit for both Cr6+ and CVD, indicating multilayer adsorption and heterogeneous surface interactions. P. capillacea showed potential for Cr6+ removal in seawater and real wastewater, although efficiency was reduced due to complex matrix effects. Reusability studies indicated a decline in efficiency over multiple cycles; however, Cr6+ uptake remained above 89.2% for CVD. Similar reusability was observed, with an initial removal efficiency of 87.29% for CFD. Although removal efficiency decreased in subsequent cycles, the material remained effective for repeated CVD adsorption. The study demonstrates the potential of P. capillacea as a readily available, cost-effective, and sustainable material for the bioremediation of Cr6+ and synthetic dyes from water, contributing to the development of environmentally friendly water treatment technologies.