Scholarlink

<p>In the production of geopolymer concrete (GPC), using ground granulated blast furnace slag (GGBFS) and fly ash (FA) can reduce the carbon dioxide footprint and decrease the amount of waste materials released into the environment. Finding the compressive strength (fc) of GPC through experiments is time-consuming and costly; thus, applying artificial intelligence models can expedite this process. This study aims to compare the performance of deep Long Short-Term Memory (LSTM) and the machine learning (ML)-based algorithms in predicting the f<sub>c</sub> of FA/GGBFS-based GPC. Artificial neural networks (ANN), Bootstrap aggregating (Bagging), Least-Squares Boosting (LSBoost) and K-Nearest-Neighbours (kNN) were used for ML-based algorithms. For this goal, data were collected from the previous studies in the literature. The selected input characteristic variables included the chemical composition and quantities of FA and GGBFS, fine and coarse aggregates, sodium hydroxide molarity, alkaline activators, superplasticizer dosage, and curing temperature. Based on sensitivity analysis, the most influential parameter in the f<sub>c</sub> of FA/GGBFS-based GPC was the fine aggregate content. Performance metrics, error percentage distribution, and Taylor diagrams indicate that the highest accuracy was achieved by LSTM, which had an R-squared value of 0.98. This was followed by ANN, LSBoost, Bagging, and kNN. Notably, LSBoost and ANN also demonstrated strong performance, with R-squared values of 0.94 and 0.95, respectively. Also, Bagging showed acceptable ability for f<sub>c</sub> estimation of FA/GGBFS-based GPC due to having an R-squared value of 0.88, but kNN had very poor performance.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Comparison of deep LSTM and machine learning models for predicting compressive strength of fly ash/slag-based geopolymer concrete

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年9月25日

查看全文
  • Ceren Kina,
  • Harun Tanyildizi,
  • Mohd Mustafa Al Bakri Abdullah,
  • Rafiza Abdul Razak,
  • Thanongsak Imjai

摘要

In the production of geopolymer concrete (GPC), using ground granulated blast furnace slag (GGBFS) and fly ash (FA) can reduce the carbon dioxide footprint and decrease the amount of waste materials released into the environment. Finding the compressive strength (fc) of GPC through experiments is time-consuming and costly; thus, applying artificial intelligence models can expedite this process. This study aims to compare the performance of deep Long Short-Term Memory (LSTM) and the machine learning (ML)-based algorithms in predicting the fc of FA/GGBFS-based GPC. Artificial neural networks (ANN), Bootstrap aggregating (Bagging), Least-Squares Boosting (LSBoost) and K-Nearest-Neighbours (kNN) were used for ML-based algorithms. For this goal, data were collected from the previous studies in the literature. The selected input characteristic variables included the chemical composition and quantities of FA and GGBFS, fine and coarse aggregates, sodium hydroxide molarity, alkaline activators, superplasticizer dosage, and curing temperature. Based on sensitivity analysis, the most influential parameter in the fc of FA/GGBFS-based GPC was the fine aggregate content. Performance metrics, error percentage distribution, and Taylor diagrams indicate that the highest accuracy was achieved by LSTM, which had an R-squared value of 0.98. This was followed by ANN, LSBoost, Bagging, and kNN. Notably, LSBoost and ANN also demonstrated strong performance, with R-squared values of 0.94 and 0.95, respectively. Also, Bagging showed acceptable ability for fc estimation of FA/GGBFS-based GPC due to having an R-squared value of 0.88, but kNN had very poor performance.