Scholarlink

<p>This study aimed to evaluate the Shear Bond Strength (SBS) and durability of different resin cements used for cement-retained restorations between zirconia crowns and titanium abutments. A total of 36 zirconia cubes and 324 titanium cylinders were employed in this study. Accordingly, 6 groups were assigned according to the used resin cement: three self-etching types (RU, AI, GMP), two self-adhesive types (IS, GM) and one unfilled type (SB). Each group was further divided into 3 sub-group based on storage condition (<i>n</i> = 10): 24-hour water storage at 37&#xa0;°C, 5,000 thermocycles, and 10,000 thermocycles respectively. SBS testing employed a universal testing machine to quantify the force required for material fracture at the interface, followed by failure mode analysis. Two-way ANOVA showed significant influences of storage conditions and bonding agents on SBS values (<i>p</i> &lt; 0.05), except for IS and GMP (<i>p</i> &gt; 0.05). The SBS values of AI and RU showed a downward trend, while SB and GM showed an upward trend after 10,000 thermocycles. The SBS values of GM and GMP were significantly different in the 24-hour water storage but not after thermocycles. Within the limitations of the current study and based on the findings, the following can be concluded: (1) SBS was significantly influenced by both bonding agent type and storage condition; (2) Bonding systems containing HEMA and 10-MDP exhibited high initial strength but declined significantly after thermocycling; (3) IS, GM, and GMP demonstrated stable bond durability.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

In vitro shear bond strength evaluation of resin cements between zirconia and titanium

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年7月16日

查看全文
  • Guanyu Su,
  • Shujun Wang,
  • Chuhan Zhang,
  • Yiyang Tang,
  • Mengting Wei,
  • Ali Goudarzi,
  • Lipeng Jiang,
  • Jiale Fu

摘要

This study aimed to evaluate the Shear Bond Strength (SBS) and durability of different resin cements used for cement-retained restorations between zirconia crowns and titanium abutments. A total of 36 zirconia cubes and 324 titanium cylinders were employed in this study. Accordingly, 6 groups were assigned according to the used resin cement: three self-etching types (RU, AI, GMP), two self-adhesive types (IS, GM) and one unfilled type (SB). Each group was further divided into 3 sub-group based on storage condition (n = 10): 24-hour water storage at 37 °C, 5,000 thermocycles, and 10,000 thermocycles respectively. SBS testing employed a universal testing machine to quantify the force required for material fracture at the interface, followed by failure mode analysis. Two-way ANOVA showed significant influences of storage conditions and bonding agents on SBS values (p < 0.05), except for IS and GMP (p > 0.05). The SBS values of AI and RU showed a downward trend, while SB and GM showed an upward trend after 10,000 thermocycles. The SBS values of GM and GMP were significantly different in the 24-hour water storage but not after thermocycles. Within the limitations of the current study and based on the findings, the following can be concluded: (1) SBS was significantly influenced by both bonding agent type and storage condition; (2) Bonding systems containing HEMA and 10-MDP exhibited high initial strength but declined significantly after thermocycling; (3) IS, GM, and GMP demonstrated stable bond durability.