Scholarlink

<p>Rapid tooling (RT) has evolved into an emerging area in the field of manufacturing for fabricating tools potentially reducing machining time and cost allowing higher levels of geometric freedom. In this work, the application of RT technique in electrical discharge machining (EDM) has been explored. RT tools fabricated by micro stereo-lithography (micro-SLA) are coated with thick copper coatings by electroless metallization and electroplating to be used during EDM to machine 304&#xa0;L stainless steel work piece material. The performance of the RT tools is compared with massive copper tool results considering output performance measures like material removal rate, tool wear rate, surface roughness, and surface crack density. The machined work piece surfaces and tool surfaces are analyzed using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). The proposed RT tools have shown a higher material removal rate than the conventionally used massive copper tool. In addition, micro-cracks formed on the machined surfaces using RT tools are comparatively less. Nevertheless, the RT tools have higher tool wear rate and higher surface roughness on the machined surfaces as compared to the massive copper tool.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Electrical discharge machining by rapid tools prepared by micro stereo-lithography process with copper metallization

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年7月2日

查看全文
  • Anshuman Kumar Sahu,
  • Siba Sankar Mahapatra,
  • André Martin,
  • Andreas Schubert,
  • Marco Leite,
  • Paulo Peças

摘要

Rapid tooling (RT) has evolved into an emerging area in the field of manufacturing for fabricating tools potentially reducing machining time and cost allowing higher levels of geometric freedom. In this work, the application of RT technique in electrical discharge machining (EDM) has been explored. RT tools fabricated by micro stereo-lithography (micro-SLA) are coated with thick copper coatings by electroless metallization and electroplating to be used during EDM to machine 304 L stainless steel work piece material. The performance of the RT tools is compared with massive copper tool results considering output performance measures like material removal rate, tool wear rate, surface roughness, and surface crack density. The machined work piece surfaces and tool surfaces are analyzed using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). The proposed RT tools have shown a higher material removal rate than the conventionally used massive copper tool. In addition, micro-cracks formed on the machined surfaces using RT tools are comparatively less. Nevertheless, the RT tools have higher tool wear rate and higher surface roughness on the machined surfaces as compared to the massive copper tool.