Scholarlink

<p>Jumping wave formation in front of the processing tools occurs during low plasticity burnishing methods. It significantly disturbs the plastic deformation of surface structures process. The wave causes also additional structures to appear on the processed surface such as additional dales, seems and laps. Furthermore, the rise of processing burnishing force causes significant increase the depth of the surface structure dales which are caused as a result of increase of the slippage rate of material layers in the jumping wave. The results are presented based on 3D profilograms and metallographic studies of the material structure in the surface layer.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

The characteristics of the surface structure obtained in a low plasticity burnishing process in which the jumping wave occurred

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年5月21日

查看全文
  • Stefan Dzionk,
  • Bogdan Scibiorski

摘要

Jumping wave formation in front of the processing tools occurs during low plasticity burnishing methods. It significantly disturbs the plastic deformation of surface structures process. The wave causes also additional structures to appear on the processed surface such as additional dales, seems and laps. Furthermore, the rise of processing burnishing force causes significant increase the depth of the surface structure dales which are caused as a result of increase of the slippage rate of material layers in the jumping wave. The results are presented based on 3D profilograms and metallographic studies of the material structure in the surface layer.