Scholarlink

<p>Based on particle swarm optimization algorithm and first-principle calculations, the most stable structures of 10 different Pu<i>TM</i>O<sub>3</sub> systems are predicted according to their thermodynamical, mechanical and dynamical properties. The results indicate firstly all selected 50 structures are thermodynamically stable based on formation enthalpy results. 29 of the 50 structures are then predicted to be mechanically stable according to mechanical stability criterion for different structures. And then 10 of 29 structures are selected to be dynamically stable based on calculations of phonon frequency, that is, PuTiO<sub>3</sub>(Cc, Pca2_1), PuZnO<sub>3</sub>(Pca2_1, P2_1/m), PuGaO<sub>3</sub>(C2/m), PuMnO<sub>3</sub>(Pna2_1), PuNiO<sub>3</sub>(P4_1), PuFeO<sub>3</sub>(C222_1), PuVO<sub>3</sub>(P2_13), and PuCrO<sub>3</sub>(P2_13). Finally, the electronic properties of these 10 structures were calculated. All these results provide useful information to manufacture Pu-based MOX fuels by controlling impurities through formation of Pu<i>TM</i>O<sub>3</sub> compounds and the recycling of materials in recovery process.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

PuTMO3 systems crystal structures prediction and stability analysis based on first principles

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年5月19日

查看全文
  • Zexin Jiang,
  • Jintao Wang,
  • Yilin Fang,
  • Tao Wang,
  • Rui Zhou,
  • Wenli Yu,
  • Rusong Li,
  • Ning Gao

摘要

Based on particle swarm optimization algorithm and first-principle calculations, the most stable structures of 10 different PuTMO3 systems are predicted according to their thermodynamical, mechanical and dynamical properties. The results indicate firstly all selected 50 structures are thermodynamically stable based on formation enthalpy results. 29 of the 50 structures are then predicted to be mechanically stable according to mechanical stability criterion for different structures. And then 10 of 29 structures are selected to be dynamically stable based on calculations of phonon frequency, that is, PuTiO3(Cc, Pca2_1), PuZnO3(Pca2_1, P2_1/m), PuGaO3(C2/m), PuMnO3(Pna2_1), PuNiO3(P4_1), PuFeO3(C222_1), PuVO3(P2_13), and PuCrO3(P2_13). Finally, the electronic properties of these 10 structures were calculated. All these results provide useful information to manufacture Pu-based MOX fuels by controlling impurities through formation of PuTMO3 compounds and the recycling of materials in recovery process.