Brayton–Moser passivity based controller for constant power load with interleaved boost converter

A DC microgrid with renewable energy sources can achieve reduced current ripple, higher efficiency, faster dynamics, high voltage gain, and less operational stress by interfacing with an interleaved boost converter (IBC). The stability of an IBC linked to a DC microgrid supplying a constant power load (CPL) can be imperceptibly guaranteed by a conventional controller. A tightly regulated CPL with nonlinear and negative incremental impedance characteristics will lead to stability issues. Uncertainties such as load and line variations will further affect the stability of the system. A nonlinear passivity-based control algorithm requires more attention than a traditional controller to achieve the stability of power converters. This article explains the Brayton–Moser (BM) passivity-based controller (PBC) for a 2-level interleaved boost converter (IBC) interfaced DC microgrid with CPL. The suggested controller can achieve high signal stability by injecting a series-connected virtual impedance. The stability of the proposed controller has been assessed using the Lyapunov stability approach. A BM passivity-based controller for a 2-level IBC with CPL has been derived and investigated under various operating modes using MATLAB and Simulink. It was also observed that the proposed system achieves at least \(2\%\) $2\%$ improvement in efficiency and \(50\%\) $50\%$ reduction in current ripple. To evaluate the performance of BM Passivity-based controller, a comparative analysis was performed between the suggested controller and the traditional PI controller, which is also included in this paper.