Interfacial energy conversion mechanism between 3003 aluminum alloy and 321 stainless steel in vaporizing foil actuator welding process

Conventional welding methods encounter significant challenges, including poor weldability, low joint strength, and the formation of brittle intermetallic compounds, primarily due to the substantial disparities in the physical and chemical properties of aluminum and iron. To mitigate these issues, the vaporizing foil actuator welding (VFAW) process has emerged as a highly promising solid-phase welding technology, particularly suitable for joining dissimilar metals with pronounced differences in properties, such as aluminum alloys and stainless steels. The present study provides an innovative quantitative analysis of the interfacial impact energy conversion mechanisms within the VFAW process. The analysis reveals that the energy responsible for accelerating the flyer workpiece comprises burst vaporization energy ( \(E_d\) $E_d$ ) and continuous vaporization energy ( \(E_p\) $E_p$ ), with \(E_d\) $E_d$ identified as the primary energy source, contributing approximately 65–80% of the total energy required for acceleration. Further examination elucidates the mechanisms underlying heat generation and transfer during the interface collision. The investigation identifies the formation of an overheating zone at the interface, attributed to the combined effects of plastic deformation energy and adiabatic shear energy within the flyer workpiece. Consequently, the interface temperature can rise significantly, reaching up to 1394 K, with impact velocities as high as 925 m/s. The analyses contribute to establishing a theoretical foundation for understanding the interface bonding mechanisms characteristic of the vaporizing foil actuator welding method.